Best Electric Nail Gun 2 Inch Brad Nails

Gun 31 Jan 2023 10+ Comments Open

1. Weiyirot Framing Nail Gun Woodworking

Weiyirot Framing Nail Gun Woodworking

The package contains a nail gun. There is a battery, a manual, and 800 Nails. They have a one-year warranty. If you have a question, please contact them. Light weight and high strength aluminum alloy nail cartridge. Not tiring even for long time use. The electric nail gun is convenient to use. The nail gun can save you a lot of time. It's widely used to make furniture, flooring, covering sofa, and picture frames. The power source type is listed. The power source. The components are included. The components are included.

Brand: Weiyirot

👤A gun wouldn't drive a brad into wood. JUNK

👤I won't drive a brad into anything.

2. WEN 61721 18 Gauge 8 Inch Pneumatic

WEN 61721 18 Gauge 8 Inch Pneumatic

You can illuminate a work area and take your staple gun/nail gun anywhere you want to go with the belt hook. Shoot 18-gauge brads in lengths ranging from 1 to 2 inches. The 1/2 inch air inlet fitting is required. There is a depth adjustment wheel, a nail gauge, and a quick release 106-nail capacity magazine. clearing jammed nails is quick and easy with a noselatch. The case and nails are not included. The pneumatic nailer needs an air compressor. The case and nails are not included. The pneumatic nailer needs an air compressor.

Brand: Wen

👤I'm impressed with both the first WEN product and this one. This is my 4th brad nailer and I have gone through 2 Porter Cables and 1 Hitachi. I have good experience to compare them. I did some aggressive testing on this nailer. Read on for my thoughts. There are no fights and contant pleads. I did a rapid fire test and found a brad nail in a thick fir. The video has a lot of information. The gun never jammed and the nails drove in. All metal nails. Why is this important? I blew out the bottom of the slide when a nail jammed while doing the same test as in the video. The slide was blown out during a jam. The all metal nail slide is called the Wen, and the plastic nail slide is called the Hitachi. I feel better with the WEN removing a jam instead of destroying the nailer. There is an observatory. Directing the air away from you and the work piece is important. The picture is attached. Some of us put too many drops in exhaust oil so that we don't get on a work piece. I had to cover the head of the nailer with a rag to keep the air out of the work piece. I am happy that the WEN built this feature. The nails are nailed to the window. I like this feature. I can see the nails remaining with a quick glance. The soft rubber hands are used. The handle is soft and comfortable to hold and protects your hand from being hit. Not all is perfect. I attached my WEN to the air hose and it leaked air out of the connection. The WEN has a steel inlet. I swapped it out for a brass inlet with a subtly different shape and the connection was tight with no air leaks. The nail gun is a great value. An air leak at the tip was the only issue that would prevent a 5 star review. Longevity is the only thing I can't review. You can't go wrong buying it.

👤I bought this six months ago and didn't use it. A wind-driven rainstorm was hours away, and hubby spotted a hole in our garage roof. I hooked it up to the compressor and gave it a try. We used the longest brads in the package. All was moving nicely until it jammed. The remnant of a brad was removed. There is a screwy one from the safety latch. It worked and then tried to reload with new brads. Simple enough? The magazine wouldn't click back in place. The head of a brad was embedded in the upper corner and I used a dental pick and a knife to cut it, but it wasn't going anywhere. I'm an old lady but still swift. We would use a smaller brad because the magazine would close if empty. That didn't work either. We had one round of brads and it was done. My advice? If you want something that will last more than 5 minutes, avoid this.

3. DEWALT DWFP12231 Pneumatic 18 Gauge 2 Inch

DEWALT DWFP12231 Pneumatic 18 Gauge 2 Inch

We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Their products are similar to items by Bostitch, Senco, and Dewalt. The electric finish nailer has a maintenance-free motor. There is no tool-free adjustment for the proper setting of nail heads. The tool-free jam release mechanism is easy to use. The rear exhaust is used to keep the work from being contaminated. 18 gauge nails are driven from 1/2 inch to 2 inch length. The tool can be kept near the user. The carrying case and owners manual are included in the kit.

Brand: Dewalt

👤Junk. 3 months of very light use stopped working. The nailer head got stuck because of a cracked ring. I pulled it apart, and the ring was cracked and broken. The nailer wouldn't withdraw, which is what happened to me. I will not pay to ship it to DeWalt for repair due to an obvious defect and one which is known to the manufacturer due to the high number of similar complaints. It is unfortunate that DeWalt doesn't stand behind their claims. I will not choose DeWalt as my first choice for tools in the future, even if it's the only choice. When I tried to call customer service, I was on hold for over 45 minutes. The last time, I left my number to be called. I didn't get a call back until almost two hours later. The second one was the same as the one I bought a month ago. I found the same damage when I took it apart. I contacted DeWalt again, but this time the response was the same as before. Will not be buying again.

👤I bought this to face nail and tongue nail some end rows of bamboo where my 18 gauge flooring nailer wouldn't fit. The best description is complete frustration. For reference, I tried a variety of nails from 1 to 2 inches. The nails are sunk about 1/6 of an inch when I set the depth. Minimum recommended pressure of 70 and moderate tool pressure are used to keep the work tight. That's if a nail comes out. When I pull the gun and nail, I find a small hole in my work with no nail. Over and over again. I would find the stud, shoot the nail, and find the baseboard not snug against the wall when installing it using 2 inch nails. It must have been missed. Move to the right about a half inch and the baseboard still isn't snug. Missed the stud again. What the heck... I used to be good at this. I know I'll hit the stud this time if I move the left of the first hole. Shoot a nail and the baseboard is not attached. Arrgghh! I found three nice holes in my stained pine baseboard, and no nail in sight, when I went down on the floor for a closer look. The nail magazine has something for you. magazine was locked tightly and full strip inside. This is the fourth hole. It's amazing... It finally shot a nail. It's good for me! You have to be kidding! Extra work like having 4 holes to fill for a nail is not good. We'll see what happens with the replacement.

👤I only gave this nailer one star because of the quick delivery. I noticed the zip tie on the boxes was missing when I removed the carry box from the plastic sleeve. I heard air escaping from the front part of the nailer when I hooked my air hose to the tool. I tried to see if it would shoot brads. It was losing so much air that my small compressor turned on after each brad I drove. I was not going to buy a Dewalt because they are the same as the Bostitch brad nailers. I thought I would try it out since it came with a better warranty than others. Bostitch brad nailers don't last more than 2 or 3 years before they need to be rebuilt and it's more expensive to rebuild than to buy a new one. This was my third brad nailer that failed and I have had two Bostitch 18 gauge staple nailers. I have had good experience with other Dewalt power tools, but I can't recommend pneumatic brads or staplers from Bostitch. I will return the nailer for my money. I will buy another brand.

4. THINKWORK Cordless Durable Battery Powered

THINKWORK Cordless Durable Battery Powered

It has a certification that assures after-sale service. Before use, please read the instructions carefully. The 180-day return service guarantees a hassle-free shopping experience. The nail gun has passed a quality and safety inspection and has a beautiful appearance. The power of nail shooting and compatibility have been recognized. The 18GA nails of any brand have a light duty staple and a brad nail. It also supports dual modes, which can be switched between continuous nails or single nails. The most advanced technology is used to ensure battery quality. A 2Ah battery can fire 700 nails. The battery can be fully charged in 45 minutes. There is power and operation. There is a GUIDANCE. The nail gun's rotating gear can adjust the force of the nail, the deepest can reach 50mm, and the fastest can reach 100 nails per minute. The push-type nail head is the safest. After turning on the switch, the small flashlight on both sides of the fuselage will light up, which is suitable for use in small and dark places, and the hook below can be hung on the waist when climbing. The corded electric nail gun kit includes a nail gun, 1000 nails, a battery and a manual. The "THINKWORK" brand warranty service card has also been added. They sell the best products to satisfy their customers. Please use it in a timely manner after receiving the goods. If the packaging is damaged, the product can't be opened or charged.

Brand: Thinkwork

👤My air powered nailer is quicker in the shop but when used for trim it beats the air nailer hands down. The crappy material used for trim doesn't work with a hammer and finishing nails. A brad nailer is needed to trim a house. It takes me over an hour to get the air lines out to the far end of the house where I'm doing a major bathroom renovation. The nailer is a great time saver because I only have a few hours after work to get anything done. The air unit is just as powerful. It's big heavy and clumsy compared to the air unit, but the convenience and time saving more than make up for it. I don't know how it will hold up over time. I have a few Chinese tools from 40 years ago that still perform well and I'm still using, others break as soon as I take them out of the box. It looks like it may last a while. I'm very happy with this unit.

👤This is a useful tool. I own a compressed air gun and I would say it works well. I don't have to carry the compressor with the tubing all over. I didn't give it a 5 star because of the heavy tool.

👤The set included a tool, battery, and a bag. It's a great starter kit for people like me. The nailer helped me finish my shoe rack project in the past 2 weekends. My wife is very happy so far. Pros. The kit is easy to load with the nails. It's handy since it doesn't require air. There are cons. There are a few times the nails didn't get complete down, possibly because of the limited space so it wasn't fully pressed down. I had to charge the battery once in the middle to finish my shoe rack.

👤I think it is great. I am a semi- do it myself person. It is great to have around the house. I didn't think it was that heavy. worried It has not been an issue for me and my lady arms. Here and there it shoots blanks. I reloaded it 3 times, but I haven't had a jam yet. The battery lasts a long time as well.

👤I got this because I wanted something that did nails and staplers for my projects. I found more uses than I thought. The original one was fine, but it stopped working after a long time. A weekend warrior here. I contacted the company and they had more trouble shooting tips. The customer service was great. I have a new one. After 200 bangs, it's doing just fine. That is the reason for 5 stars. It's heavy and wouldn't do a day long project with it, but for my needs. I have a bunch of tools, some of which are used a lot, but others are occasional, so I have a Harbor Freight recip-saw.

👤My shed was built with no problem. Don't be worried about the power. There are still plenty of battery left after shooting 2 rows of staplers. I like it. I got used to it quickly.

5. WEN Pneumatic 18 Gauge 1 2 Inch Galvanized

WEN Pneumatic 18 Gauge 1 2 Inch Galvanized

WORRY-FREE-12-month-warranty is a quality assurance. Before use, please read the instructions carefully. They will reply within 24 hours if you have any questions. 18-gauge brads range from 2 to 3 inches in length. The product has a 1/2 inch air inlet fitting. Product 1 has a depth adjustment wheel, a nail gauge, and a quick release 106-nail capacity magazine. The noselatch makes clearing jammed nails quick and easy. Product 2 contains 1,200 brads, 1-3/4", and 2-1/8" nails. Product 2 is used for picture frame assembly. Product 2. There are fewer tool jams than there are competitors. Product 2 has the highest withdrawal values. Product 2 has the highest withdrawal values.

Brand: Wen

👤I love buying Wen products with everyone I buy. This is not an exception. It's easy to load and hold weight is like holding a staple gun.

6. Cordless NEU MASTER Upholstery Carpentry

Cordless NEU MASTER Upholstery Carpentry

The air hose is 15' in length and has fittings included. The brad nailer stapler is portable and easy to carry, since it has a built-in battery powered motor. The staple gun light is weighted at 1.15 lbs and can be used for longer periods of time or in tight spots. It is easy to access bottom-load magazine. It is easy to monitor your staple levels with the magazine window. The power staple gun has a triple lock mechanism for extra security and safety. The nail gun can only fire when contact safety is pressed on the surface in order to avoid inintended firing or damage caused by misoperation. High Performance Their electric stapler comes with a battery and cable for consistent driving performance. It drives 1000 shots per charge. The firing speed is 30pcs/min. The brad nails are suitable for 8-15mm. 6-14mm (1/2”) length, type 53/JT21. The staple gun are made of high quality materials and can be used up to 10000-50000 shots. It's perfect for fastening fabrics, foils, leather, cardboard and etc. The staple gun are made of high quality materials and can be used up to 10000-50000 shots. It's perfect for fastening fabrics, foils, leather, cardboard and etc.

Brand: Neu Master

👤I had a few jobs where a staple gun was needed. I didn't want to use a corded gun. I didn't want to spend a lot since it wasn't going to use a lot. It was a great piece for the money. I didn't think it would be so well built. The body casting is large and built to take a beating. The fit and finish was very well done. They will give you a sample pack of nails and staplers. I have never seen a battery status report on any of my Dewalt stuff. This thing has a lot of power. It is not a weak tool. It's nice that they give you an adjustment for depth control. I was pleasantly surprised by how well built and thought out this tool was, and for the price it is an awesome deal. I wouldn't hesitate to use the other products in their line up if they were the same way the nail gun preformed. One thing to know. It took me a minute to figure it out, the staplers and nails load into the top edge of the sleeve. I use a regular nail gun to load nails along the bottom edge of the feeders.

👤The tool is relatively light for its size. I like that it is designed for your hand. It's a very easy tool to use, and has great penetration for both nails and staplers.

👤I received an item about two weeks ago. I used the staple with the unit on a 4x4 wood and it didn't go all the way down on max power, which is ok for home use but not recommended for pro use. I stapled the galvanized welded wire fence with this and it worked great. The weight is ok. I haven't tried to use the nails yet. For the price and coreless, I still love it. They don't have a phone number or website for support, but they do respond within 2 hours. I recommend the item.

👤I've owned a Brad gun for 20 years. This tool is superior to all others. I've been looking for a good gun and now I have it. I am very full. Thank you!

👤I would have chosen less than one star for this. It's a great idea, but it didn't work out. I was trying to staple fabric to wood. It was jammed and jammed and jammed no matter what I did. You have to wait until it resets itself or something. It's a long wait. It was even more frustrating that you would wait and the staple would jam. You have to take it apart, put it back together, and then staple it, and it's usually the first time you staple after you put the staple back in. You have to wait for it to reset itself and then try again, and you might get one good staple out of five times of jammed staple. I have a stack of f'ed up from when it would jam in there. Sometimes there would be several of them that tried to feed out at the same time. It was difficult to clear the jams. It took me forever because I only put in 20 staplers. I knew that this was not going to be something I would be willing to keep and I was cursing. It makes me angry when people sell inferior junk. It takes everyone's time and energy.

7. CRAFTSMAN CMCN618C1 Cordless Finish Nailer

CRAFTSMAN CMCN618C1 Cordless Finish Nailer

We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Their products are similar to items by Bostitch, Senco, and Dewalt. This nailer drives 18 GA finish nails. The need for a compressor, hoses, or gas is eliminated with a fully cordless design. Climate conditions provide consistent firing power. Continuation results: There are tool-free depth settings for quick set up. Improved EFFICIENCY. The settings for jam and stall are tool-free. There is an orderly balance. The lightweight has an optimal center of gravity and is light enough to carry. Deduct COMFORT: The handle is overmolded. CONVENIENCE: Belt hook for access and storage. CONVENIENCE: Belt hook for access and storage.

Brand: Craftsman

👤I think their tools are hard to beat and I'm a Milwaukee man. We got $200 in Amazon gift cards for Christmas and redid the floor in our bedroom, so this Craftsman ended up in my tool box. I wanted to go to Milwaukee since I have the batteries, but the bare tool was over $300. It was too expensive for me to tolerate, so I went looking for something similar. After reading the reviews, I knew this was the nailer. I have good things to say after using it. I've been told that Craftsman makes a good power tool, but I've never used it. I can attest to the fact that Craftsman makes quality tools. I'm partial to Milwaukee, and always will be, but Craftsman has won me over for tools that are too expensive in Milwaukee. The nailer has good power and was able to drive all the nails flush. We didn't use a whole bar, but the battery was enough for what we needed. I can definitely recommend this product.

👤In 5 hours, 150 feet of baseboards were installed.

👤I was not happy that the link said "frequently bought together". I didn't notice that this is a nail gun. I tried their nails. It worked. I shot about 30 nails. My carpenter has a battery gun that makes noise like a gun shot when it is reloaded, and it makes even more noise when it is not reloaded. This one doesn't do that. The nail goes in where the depth is set after a single pop. It's like a semi auto pistol. The pop job is done.

👤Over the next few months, I am going to replace all of the baseboards in my home. I could have used my air powered brad nailer, but it was a pain and a lot of noise. I decided to try it. I got this one from Amazon after failing to get it from a local store. It has worked well and no issues have arisen. I have used brads with no issues. This is nice for something that is easy to use and easy to move around with. It is not light weight, but I am not using it 8 hours/day, just from time to time, as I work my way through the house.

👤Love is love. Great tool. It was quick and easy. I got this to finish after tiling. I was going to pay someone to do it but it's almost fun. It's worth it. I already used the cost to do another project for my wife. It was great to not have to buy or find space to store a compressor.

👤The nailer did what I wanted it to do. I had a large trim project that I hated. No cords to chase, plenty of power, easy to load, with the addition of this nailer. The only downside was that with the extended battery it gives your wrist a work out after you've used it for a long time. The install time was cut in half. Excellent!

8. 18 Volt AirStrike 18 Gauge Cordless Tool Only

18 Volt AirStrike 18 Gauge Cordless Tool Only

It's ideal for wood working, upholstery Installation, flooring, molding, roofing, picture framing, door and window installation. It's perfect for building pet houses. It can drive up to 60 nails per minute. No compressor, hoses or expensive gas cartridges are required. Convenient and superior performance are offered by the corded design. Convenient and superior performance are offered by the corded design.

Brand: Ryobi

👤I've spent a lot of money on tools in the past. Those annoying jobs will be made easier by this thing. I'm going through the house looking for things to use. It seems silly to think that a bunch of people have complained about the weight. The brad gun is more likely to wiegh than a regular one, but the compressor that comes along with it and the hose that tangles wiegh so much more. The extension cord is no longer trip over. It takes about a second or two for the nail to be shot out, but after the third time, I was off and running. If you already own a battery-operated item, they will work with it. I bought 1.5 inch nails for a project that I am doing and they sat in the box without a problem. I had about 50 nails done last night and still have a full charge. The area is lit up by a great light. These people lie to get you to buy from them, so I won't give much information about the seller. They don't have the item in stock, so you will get it from them. I'm not the only one who has done it. I wanted to cancel my order but it would have taken longer. The ad said 2 day shipping. 13 days later, I got nailed.

👤I used a friend's AirStrike tool to drive 1500 nails. I didn't think I'd find much use for a nailer. I got my own because I can't live without one. If you want to use the battery for big jobs, then you should get a second battery.

👤The tool is heavy and bulky. I have a pneumatic brad driver that is 888-282-0465. The pneumatic tool has a compressor, hose, power, etc. The tool is not able to fit in tight spaces. There is a delay from when you squeeze thetrigger until the tool shoots the brad that takes a little getting used to.

👤The product is powerful enough for 2.5in nails. It was used to fiz boards on wood projects. It's more practical than the whole pneumatic system.

👤It is light and easy to use. The job is being done with quality construction.

👤Why bother with air compressor when you can use a nice tool?

👤I use this for small jobs all the time as a contractor. Delv is fast and well packed to minimize damage. The price is great for a high-quality product.

👤It's very handy. I used it to install a bed in my kitchen. It's easy to reload. I'm very happy I bought this.

👤Thank you, it is faulty, please replace it.

👤Denn DAS Teil ist das bitte. Ich war immer skeptisch, soll I mitten in dem groen Teich alles "nur" getackert/genagelt. Ich ist die gute Schraube. Aber ist Klasse. Sehr guter Preis, klasse in der Handhabeung, schneller Wechsel der Nagelstreifen, ZWEI. Verschiedene Einstellmglichkeiten der Eindringtiefe. Praktische und schnell ist Modi, Einzel, and Automatikschuss. Im Gewicht des Gertes ist immer, aber meine Gte. Maschine ist ne ist! Sehr schnelles Arbeiten ist so unfassbar. Schnelles, effizientes, and scupes are all part of the Arbeiten. Im Holz ist das "Halteelement". Wer macht, das ist in schillerndem BLING angrinsen. Deswegen nehme, wie bei anderen Projekten DIESE. Ich bin begeistert!

9. Metabo HPT MultiVolt Brushless NT1850DF

Metabo HPT MultiVolt Brushless NT1850DF

The kit includes a Carrying Case, Extra No-Mar Tip and Oil. The GO COMPACT is 30% smaller and 31% lighter than the previous model. The Air Spring Drive System is similar to a pneumatic tool. The included 3.0Ah battery can hold 1,650 nails. Up to 3 nails per second with no ramp-up time. The warranty is covered by Metabo HPT's Lifetime Lithium-Ion tool warranty. The warranty is covered by Metabo HPT's Lifetime Lithium-Ion tool warranty.

Brand: Metabo Hpt

👤Metabo is the most reliable and easiest to use battery nailer, as it is owned by a finish carpenter who has been in the trade for 16 years. I haven't gotten my air compressor out since I started using this gun. 2” nails in red oak, but poplar and mdf are not a problem. Every time, a nail is put into a red oak set. The gun can be difficult to hold if you don't hold it right. You will have to set some nails until you figure it out. If metabo makes a 15ga in a compact version, I will stop using air compressor and hoses.

👤I bought the Metabo HPT brad nailer to do some interior trim work. The nailer worked well and was much easier to use than the air hose. I have had Metabo/Hitachi HPT tools for a long time and have never had a problem with performance orDurability. I've had the Metabo/Hitachi HPT multi tool, circular saw, jig saw, reciprocating saw, a couple of drills, and a couple hand vacs for many years and they've all given me flawless performance. The tools all use the same battery and it's easy to switch between them.

👤Quality reliable tools are what I need as a contractor. I thought I would try metabo. Someone told me that they bought them. The pin that drives the nail is made from cheap stamped metal. It drove a few nails. The driver pin was going over the top of the nails and they were stuck inside the gun. The driver pin should be made from tool steel. I made one of the most important parts cheap. Someone that uses this every day will find a driver pin in 6 months or a year. I have a skill saw that works. I will never buy another one of their tools again.

👤I replaced my hitachi nailer when it died. It is closer to my 23ga pin nailer than it is to my 15 gauge. It seems like nothing has changed, unless you go crazy with the fire. There is a danger of dry-fire because there is no lock out.

👤The gun failed to seat the 2” nails. I think I'm asking too much, because 18 Guage stopped from the wood surface.

👤I probably should have bought Metabo's nailer. This tool is a Brad nailer. I didn't know the difference when I bought it. brads work well for me. I am now 18V Metabo. My noisy compressor is history.

👤Light weight and easy to hold. It was easy to load. Every time.

👤Does not sink nails often. I am very disappointed.

10. DeWalt DWFP12233 Precision Selectable Trigger

DeWalt DWFP12233 Precision Selectable Trigger

The tool can only fire 20 times per minute. The user should wait at least 3 seconds between firings to make sure the tool works well. Proper setting of nail heads can be accomplished with a tool-free adjustment. The rear exhaust is used to keep the work from being contaminated. 18 GA Brad nails are driven from 1-1/8" to 2-1/8" in length. The tool-free jam release mechanism is easy to use. There is a choice of triggering: sequential or contact. There is a choice of triggering: sequential or contact.

Brand: Dewalt

👤This tool requires an air compressor and is described as pneumatic. The item's specifications indicate that it is electric powered.

👤The description is not correct. The pneumatic air tool can't be described with the 20volt max. The tool is shipped with no starter brads, spare plastic tips, or the flexible air connection shown in the pictures. This is not what I would expect from Amazon. Don't ruin it with bad descriptions and poor support, it is a great product from DeWalt with a great 7 year warranty.

👤The supplier was not the same as the description. Came from MAX TOOL. The description states that the air connection and brads were made with a swivel. Didn't come with either. It did not have the connection that was required. The picture shows the connection.

👤The reviewers were correct that it lacks punch. If I need a nail set and a hammer to finish, it defeats the purpose of a nail gun. Not often. Rarely, when nailed flat on softer woods. The tip could use some padding. There is a It will be a good back-up when I get a better one. I hope the 16 gauge DeWalt finish nailer isn't disappointing.

👤The seller agreed to take the items back after he couldn't give the extra items he advertised. This was a good price even without the brads. I kept it. I give this product 4 of 5 based on the nailer. There are three items that were not included in the product description for the nailer. Extra no-mar tips, sample brad nails, carrying case, and a 1/4" swivel fitting are included. When all items are delivered, I will adjust my rating.

👤I've had bad luck with this item, but I like DeWalt Products. I used the nail gun in my garage a few times before it stopped working. I tried to fix it and then bought another one from Amazon. This one has stopped working as well. I've used it at least four times. The nail gun is new. I'm sorry to write a bad review but I'm frustrated and disappointed.

👤I found the tool to operate as described. The weight is reasonable and the driver can drive Brad easily. It doesn't damage the wood. I said in the title that it's DeWalt.

👤If you are a professional, buy one.

👤I've used this gun for a number of projects around the hall, including putting up some wall panelling, and have not had any issues with it. I had some issues with misfiring, but I solved them 2 minutes later when I increased the air pressure. When I set the pressure in the low 60 psi, I had a few misfires, but when I raised it to 75-80, I had no issues. It might be the issue that others have had with it. The gun has never jammed, and it was with 75 psi. When loading the gun, make sure you pay attention to the brads and that there is no debris in the clip. When his gun popped his clip it was full of nonsense which was causing him grief. This gun is basically the same gun as BOSTITCH BTFP12233 Smart Point 18GA. This gun appears to have been modeled after the 12233 by Dewalt. You can't go wrong with either one.

11. Makita XNB01Z Lithium Ion Cordless Nailer

Makita XNB01Z Lithium Ion Cordless Nailer

The Metabo HPT's Professional 5-year tool warranty is covered. The magazine capacity can be up to 120 nails and the 18 gauge brad nails can be from 1 to 2 inches. The switch can be used for sequential or contact operation. The net weight is 7.7 pounds. The dial is easy to use for a wide variety of finish applications. The anti-dry drive mechanism is designed to prevent damage to the work surface. The gauge shows the charge level of the battery. The battery is not included, so you can only drive up to 1,660 nails. The battery is not included, so you can only drive up to 1,660 nails.

Brand: Makita

👤I am a man. I own a construction company and we only buy 18v tools. Everything I've ever bought has exceeded my expectations, until I bought this piece of shit. You will have more nail problems than you will have nail problems. I don't like the excessive nail holes that have to be filled and sanded when I install high end kitchens, crown, and custom wood work. jacking up trim is the only thing this turd is good for. I would recommend any other 18v tool they make, but save your money on this one. I would give it 0 stars.

👤The money was wasted. I install doors and trim for a living and thought this would be a game-changer. Absolutely not. My friends work better. Even shoots through maple. I don't want to say that because I have 12 different makitas. It is all I buy. The gun is garbage. Make sure you buy the spring tool nail set.

👤Since they first came out, I have had one of them. It worked well with Poplar, but not for Maple or Oak. After a couple of years of light usage, it suddenly wouldn't shoot 2 inch 18G nails. I took it to a repair center in Houston. They said it was ready after 4 days. The technician wanted to talk to me when I picked it up. He told me that these guns are not well designed because they need to happen with every shot and that they are not well designed. Don't expect it to work correctly for a long time, and always have a backup. The company man tells you the gun is useless for a professional. Don't waste your money on this gun, I put one star on it. Even with a 5ah battery, it will not sink a single nail in any kind of hardwood. I use a 15 year old DeWalt if I need an 18G battery gun.

👤There is an update. I have to join a group of people who say that this tool stinks. Don't buy it. The only thing that helped me was to spray the moving parts with WD40 so that it doesn't leave a black spot. I almost didn't buy this tool because of all the negative reviews. I don't use any other types of battery pack orcharger, I only use the one from Makita. After getting it yesterday, I drove 100 2 inch nails through plastic and wood trim into Douglas fir 2x4 and kiln dried hardwood. I couldn't find a wood in my shop that was perfect every time. If you're discouraged by the negative reviews, mine works great.

👤This is the first tool that I have ever really disliked. The reviews that had the best information in them have turned out to be the bad reviews that it received. I ran a test on the tool using 1 1/4" brads on both hardwood and softwood. I made sure that the depth setting was the deepest possible before starting and then began on a piece of doug fir. The nailer on this piece of soft wood worked as advertised, but when I tried it on a piece of white oak, the results were not as good. The tool was not consistent. The first five nails set the surface of the material flush with them, but then they started to set the brads in a very inconsistent manner, sometimes setting them flush, but most times leaving the brads proud. The brad used is within the manufacturers specifications and the tool failed to deliver. I used the same nails for both the test and the older brad nailer that I ran. The nail heads were not set as deep into the hardwood as they were in the softwood, but they were set the same depth. I can't recommend the XBN01z to anyone who would want it for production. It doesn't perform well enough in the variety of materials that a professional might run into on a daily basis to make it worth considering. There are a few other issues that I should mention. The balance of the tool is not normal. If you were using a different tool, it would tire you out quicker than if you held it to the tool horizontally. A pneumatic tool with a long hose attached. The continuous operation mode does not operate the same way as its predecessors. It operates at the same speed as the single nail setting and does not offer enough of a speed increase to make it worth having as an option. When activated, it requires that the tool cycle up before you apply pressure to the tip. The design of the Dewalt tool allows rapid fire when set to continuous mode. Why a two star rating? The tool is made of good quality materials and has a few minor features. They are not worth mentioning when compared to it's failure to operate on a consistent basis on what I consider to be standard construction trim materials.

Summary

What is the best product for electric nail gun 2 inch brad nails?

Electric nail gun 2 inch brad nails products from Weiyirot. In this article about electric nail gun 2 inch brad nails you can see why people choose the product. Wen and Dewalt are also good brands to look for when you are finding electric nail gun 2 inch brad nails.

What are the best brands for electric nail gun 2 inch brad nails?

Weiyirot, Wen and Dewalt are some of the best brands that chosen by people for electric nail gun 2 inch brad nails. Find the detail in this article. Thinkwork, Wen and Neu Master are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com