Best Electric Nail Gun 2 Inch Nails

Gun 31 Jan 2023 10+ Comments Open

1. Ryobi P854 Cordless Lithium Ion Included

Ryobi P854 Cordless Lithium Ion Included

One P320 nailer, one P102 battery, and one P118 Charger are included in this kit. AirStrike technology eliminates the compressor and bulky air hose. There is a single sequential mode for precision placement. The tool handle has a grip-light technology. This tool works with 18V batteries.

Brand: Ryobi

👤Out of the box, only a small percentage of the time fires. It had to be broken open and cleaned up. It's firing about 85%. The hot iron is branded "REFURB". I had to file it down because they did a horrible job. Same with the battery. It would have been better if the sticker was done in a place that didn't mar the tool. I'm happy with the tool, but I won't use it again.

👤The rate of fire is not as fast as a pneumatic rig. I assumed it would be heavy, with or without the bigger battery, but it was. It's worth it for the gun. The only complaint I have is that it half shoots a shot and then you have to reset the safety on the nose by pulling it off the work and then setting it back into the shot. It is annoying but expected performance wise with anything that is pneumatic. I think it is a good buy. It isn't as easy to use as other more expensive and slightly different styles you can get.

👤I absolutely adore this! I was hesitant to buy it because it said "restrained". I took a chance after reading the reviews and seeing it was a 4-5 star. The purchase from Amazon was the best so far. The little guy has helped me finish some amazing projects, including a serving tray and redesigning the walls in my half bath, installing a board and batten design! Highly recommend!

👤The Brad nailer was given to me and I went to use it. The book tells you how to adjust the depth nails. It wouldn't shoot the nails in the way. Returned it and was charged a fee for it to not work. Don't order from this company.

👤The tool is great. It's easy to use and the battery lasts a long time on a full charge. I have used this to put up baseboards and trim in most of my house. It's very handy for woodworking as well. The tool is easy to use, with mechanisms for adjusting depth, loading nails, and firing mode. It's wonderful for the average homeowner and hobbyist, but I can't say if it would stand up to regular contracting work. Overall, would recommend and buy again.

👤This is the tool to use if you install a lot of base board. The fact that you don't need a compressor made it worth the price.

👤I had to have this because I watched videos on the internet of furniture repairers using it and it was easy to aim and carry.

👤My husband was skeptical that a battery operated device would work well enough to do the job effectively, but based on other reviews, he gave it a try. It works well. The other tools we own complement the battery system. Great purchase!

2. WORKSITE Cordless Lithium Ion Improvement Woodworking

WORKSITE Cordless Lithium Ion Improvement Woodworking

The components are included. They will help you to solve the problem as soon as possible, so please feel free to contact them. The brad nailer and staple gun was designed to be featured with both functions at a modest price. It's suitable for 18GA 1/2" brad nails. The staple width is 6.0mm. The depth adjustment mechanism of the nail gun allows you to precisely locate the depth of the nails. Two Firing Modes allow you to choose between single or contact Firing for your projects. There are dual LED lights that help to illuminate the workspace. The charging and discharging protection of the 4.0a battery makes it more durable. This 18 gauge nail gun is lightweight and compact, and it gives you access into tight spaces and limits your fatigue.

Brand: Worksite

3. WORKSITE Cordless Stapler Improvement Woodworking

WORKSITE Cordless Stapler Improvement Woodworking

Must press the button first. When loading brad nails, put the nails in the side of the magazine. Make sure you use the right sizes of the nails or staplers. The BHTOP brad nail gun kit has a charging cable, 500pc 10mm 18guage nails, and 500PC 8mm stapler. High Performance drives a range of 18 gauge brad nails. This nail gun can provide precise countersinking of nails for a wide variety of finish applications. The brad nailer is powered by a battery and can be used without using a compressor, hose or gas. The built-in light helps to illuminate the workspace and provide tool diagnostics. The 2.0A battery has charging and discharging protection, which makes it more durable and safe to charge. The 2.0A battery has charging and discharging protection, which makes it more durable and safe to charge.

Brand: Worksite

👤No funciona lo suficiente, pero la verdad no tienes. No la recomiendo es una de mis peores compras.

👤I don't know why I didn't own a stapler, but now that I have one, I see what I have been missing. This 20v nailer/ stapler will have you staple and nail everything. You can adjust the power on this thing. I have it set at 3 and it still packs a punch. This is worth the price. You get the battery, the charger, two packs of staple and the nail gun. This stapler has helped me staple everything.

👤The stapler looks like it. The construction quality is decent. The light switch is terrible, but it seems well thought out, and I wanted to love it. It's cheap, light weight, well put together... What's not to love? When you try to use the stapler, it's a problem. I thought I'd start easy, attaching a cheap rope from WalMart to a wooden post for the cats to scratch on. Even at the highest power setting, the staples would barely penetrate the rope. There was no chance that they were going into the wood. It was tried for a few minutes. Then leave it for a few hours and try again. It doesn't seem like I have a faulty unit. "Works" doesn't work at all. I'm not trying to tear the company down, but I thought others might benefit from my attempt to find an inexpensive crown stapler. My counsel is to look elsewhere. Thanks!

👤I was excited to work on wood projects after I got my first nail gun. I was very excited when I saw this item, it combines a nail and staple gun. The setup includes a nail gun, battery, belt clip, two packs of staplers, and the owners manual. A built in light is activated by a button underneath thetrigger. It is somewhat awkward to use, but it helps with dark spaces and where you need more light. The unit has a viewing window to check on how many nails you have left. It has the ability to use a range of tools. I have used the staple feature so far and it works perfectly. If you want to attach wood trim pieces, you can load them with 18 gauge brad nails. It is a good deal for what you get and it is reasonable for the price. It can be tiring after a period of time. Something to note is not the end of the world. Give it a try.

👤I used a nail gun to attach the air compressor. The air compressor was loud when it needed air. I needed this to replace the air compressor. I can say that it works. It is strong, but not as strong as my previous setup. I guess I am used to that extra punch. It does work on its own, so that is the big lesson here. It does get the job done, and is easy to use.

👤I am an older lady and this is easy for me to deal with. Several projects have been fixed by me. I use this tool a lot. It is easy to use. It's easy to load. It's a great value because of the nails and staplers.

4. Ryobi P320 Airstrike Cordless Included

Ryobi P320 Airstrike Cordless Included

It can drive up to 1700 nails per charge. No expensive gas canisters are required. Convenient and superior performance are offered by the corded design. Air pressure is regulated by a dial. It is easy to see when it is time to reload. The battery and brad nailer are sold separately. The battery and brad nailer are sold separately.

Brand: Ryobi

👤I bought the 18 gauge brad nailer at the home depot. I did a lot of research on which way to nail. I have been very speculative of the nialers. It makes you feel secure on the site if you have the luxury of amplepressor pressure. The thought of dragging out all the equipment just to drive a few nails was tiring. I bought this item because of that. I did a lot of research. I looked at Senco. More negative reviews swayed me from Senco. I turned to DeWalt. Rave reviews! Good power, consistent nailed, nothing but praise. I also looked at Paslode. I've never been impressed with their engineering. The battery, plus gas, left me cold. The smell and maintenance issues were more than I wanted to deal with. I know there are many people who advocate for the Paslode, but I just couldn't join in. I found no bad reviews when I did my research on the Ryobi. There were a lot of good reviews from reliable sources. I took a trip to Home Depot to see the tools in action, after doing a lot of back and forth on line. I went to the Ryobi after I approached the wall. I thought the tool was a good size. I looked over at the nailer from DeWalt. I immediately thought that it was a big gun. I came to the conclusion that the DeWalt was too big after going back and forth between the two. I am not squeezing my guns into small corners all the time, but I couldn't get my head around the size even with the glowing reviews. So, he got into the cart. Buying into another battery system for a guy like me is not easy. I would take a hard look at these products if they were made by Makita. The Makita guns are not available yet. I thought I was buying something in the U.S. I think that ryobi is on par with Black and Decker. A cheap tool. I don't think they are a professional tool. It took a lot of mental contortion to get to the register. I thought after reading the reviews that this thing is the real deal. I charged the largest battery they sell, and fired a couple brads. My eyes looked a bit bigger. It couldn't be. The nails were driven perfectly. I slammed nails into some pine, one after the next, the nails drove in as if I was connected to a hose. This gun is not far behind the "tethered" gun. Led lights and fire. Yeah! I went back to get the 16gauge finish nailer. Both nail sizes are needed. I have the same opinion about the other tools. I don't trust them. I think a better tool is the Makita. I have been abusing Makita tools for over eight years. My opinion. I have yet to use and abuse these nailers, but I have seen what they can do on their maiden voyage. I will be happy if these guns do what they are advertised to do. I will return with good or bad news eventually. I hope it's the latter, for everyone buying this product. I am very pleased with the new update. This is a useful tool. I've installed a lot of things and everything is going well. There have been cases where the nail is a little proud but that is more of a mistake. You have to get used to it. It gets bigger and bigger. If you don't have the right amount of pressure on the gun or back it off too quickly, you might have to return and set the nail. The gun has made projects that would have been more labor intensive easier to do. I will say that a corded gun will have more power, but I can live with a little nail setting here and there. It's a good tool that can change the way you work. It is for me.

5. DEWALT DWFP12231 Pneumatic 18 Gauge 2 Inch

DEWALT DWFP12231 Pneumatic 18 Gauge 2 Inch

We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Their products are similar to items by Bostitch, Senco, and Dewalt. The electric finish nailer has a maintenance-free motor. There is no tool-free adjustment for the proper setting of nail heads. The tool-free jam release mechanism is easy to use. The rear exhaust is used to keep the work from being contaminated. 18 gauge nails are driven from 1/2 inch to 2 inch length. The tool can be kept near the user. The carrying case and owners manual are included in the kit.

Brand: Dewalt

👤Junk. 3 months of very light use stopped working. The nailer head got stuck because of a cracked ring. I pulled it apart, and the ring was cracked and broken. The nailer wouldn't withdraw, which is what happened to me. I will not pay to ship it to DeWalt for repair due to an obvious defect and one which is known to the manufacturer due to the high number of similar complaints. It is unfortunate that DeWalt doesn't stand behind their claims. I will not choose DeWalt as my first choice for tools in the future, even if it's the only choice. When I tried to call customer service, I was on hold for over 45 minutes. The last time, I left my number to be called. I didn't get a call back until almost two hours later. The second one was the same as the one I bought a month ago. I found the same damage when I took it apart. I contacted DeWalt again, but this time the response was the same as before. Will not be buying again.

👤I bought this to face nail and tongue nail some end rows of bamboo where my 18 gauge flooring nailer wouldn't fit. The best description is complete frustration. For reference, I tried a variety of nails from 1 to 2 inches. The nails are sunk about 1/6 of an inch when I set the depth. Minimum recommended pressure of 70 and moderate tool pressure are used to keep the work tight. That's if a nail comes out. When I pull the gun and nail, I find a small hole in my work with no nail. Over and over again. I would find the stud, shoot the nail, and find the baseboard not snug against the wall when installing it using 2 inch nails. It must have been missed. Move to the right about a half inch and the baseboard still isn't snug. Missed the stud again. What the heck... I used to be good at this. I know I'll hit the stud this time if I move the left of the first hole. Shoot a nail and the baseboard is not attached. Arrgghh! I found three nice holes in my stained pine baseboard, and no nail in sight, when I went down on the floor for a closer look. The nail magazine has something for you. magazine was locked tightly and full strip inside. This is the fourth hole. It's amazing... It finally shot a nail. It's good for me! You have to be kidding! Extra work like having 4 holes to fill for a nail is not good. We'll see what happens with the replacement.

👤I only gave this nailer one star because of the quick delivery. I noticed the zip tie on the boxes was missing when I removed the carry box from the plastic sleeve. I heard air escaping from the front part of the nailer when I hooked my air hose to the tool. I tried to see if it would shoot brads. It was losing so much air that my small compressor turned on after each brad I drove. I was not going to buy a Dewalt because they are the same as the Bostitch brad nailers. I thought I would try it out since it came with a better warranty than others. Bostitch brad nailers don't last more than 2 or 3 years before they need to be rebuilt and it's more expensive to rebuild than to buy a new one. This was my third brad nailer that failed and I have had two Bostitch 18 gauge staple nailers. I have had good experience with other Dewalt power tools, but I can't recommend pneumatic brads or staplers from Bostitch. I will return the nailer for my money. I will buy another brand.

6. Metabo HPT NR83A5 Pneumatic Adjustment

Metabo HPT NR83A5 Pneumatic Adjustment

Convenient and superior performance are offered by the corded design. The awards are presented. The Pro brand of nailers is the preferred brand. The Brand surveys for the 2014–2018 are based on the 2014–2018. Fasteners: Accepts 2, 3, and 21 round heads and plastic strip nails. There are applications It's great for framing, subflooring, roof deck, and wall. The cylinder valve drive system is fast. There is a tug of war. There is a chance for either sequential or contact nailing. There is a tradeoff between the two. Control and flexibility can be improved with tool-less depth of drive adjustment. Accepts two strips of nails. The Metabo HPT's Professional 5-year tool warranty is covered. The Metabo HPT's Professional 5-year tool warranty is covered.

Brand: Metabo Hpt

👤I bought this to replace my nr83a2. The hitachi and Metabo are not the same. The mechanism feels good. Whenever you drive a nail, the sparks are like a firework. After about 50 nails, it stopped firing. I don't need this. Returned the gun and had it fixed. It is more reliable than the new one, even though it looks bad. Old one says it was made in Japan, while the new one says it was made in Taiwan. The new hitachi is not the same as the old one.

👤The nailer is great, but they messed up trying to change thetrigger. You don't need tools to change full auto to single shot. It could be placed on a plywood roof with rubber bumpers on the sides. Nice paint.

👤This is a bad boy. It was possible that it wanted to pound some sinkers out of the box. Smooth loading. It drove a lot hard into yellow pine when it was at 80 psi. It was easy to frame and build. This is not lightweight. My shoulders are not what they used to be. The framing was okay because of the set-up before studs and headers, but the shot in with 2” ring shanks caused me to tale some breaks. The gun could handle it all day long. They were my fault. I let the keeper go and it slammed into the back of the nails. The plastic clip was broken and allowed the nails to come at the head. It was necessary to be less aggressive on the release. I would buy again if I needed another. I think this one may outlive my family.

👤I know this is a good nail gun, no problems, just one Amazon need to improve in delivery services, I ordered it on the 22nd and it arrived on the 25th. It arrived today. Just like that. There is no package box to protect the item. Really bad experience...

👤I love the NR83A5. It's my favorite gun. The crew ordered another one and it was sent. The model does not have the depth of drive adjustment. We use these guns for both framing and sheeting, so it's a big problem. You have to turn the depth down to not blow holes. I ordered the same gun again as we start a new framing job next week, and have also started a return on this gun. I'm out over $500 for one gun. Again, love the gun. It gets 5 stars. The Amazon has a 1 star rating. If they send me the wrong gun again, I'll have to buy one at Alpine Lumber, which will cost me $100 more. It was very bad.

👤The product was heavy for a granny with out of shape hair. I bartered with a handyman for several hours of work. He is very happy with it.

👤I sent it to my son as a birthday gift, he loves it, he's a carpenter. He can complete a job in a third of the time it would take using his standard framing hammer. He works smarter. Not hard.

7. BOSTITCH BTFP12233 Smart Point Nailer

BOSTITCH BTFP12233 Smart Point Nailer

A compartment at the base of the tool holds all the bits and nozzles. Smart point technology. The electric brad nailer has a smaller nose than the BOSTITCH nailers, which makes it easier to place the nail. 18 gauge brad nailer drives 18 GA brad nails. The risk of oil stains is reduced by oil-free operations. The tool-free jam release mechanism is easy to use. Control for countersinking brad nails. Trigger system that can be used for contact or sequential operation. The other features are air exhaust and belt hook. The kit includes a carrying case, extra no-Mar tips, and a nailer. The kit includes a carrying case, extra no-Mar tips, and a nailer.

Brand: Bostitch

👤A true no mar head and fantastic driving power. The high end Makita I bought from Amazon was terrible and I sent it back. There are reviews under that unit. It couldn't toe nail (nail at 45 degrees) worth beans on any brads longer than 1/3, and it had to run the gun at and just over its max pressure, which was not good for the life of the gun. The gun mared the softwoods on almost every drive. I am sad to see such an inferior product put out by them, but I love my other Makita tools. I was looking to buy a new brad nailer as the Senco I have could not toe nail the longer brads that I neeeded to drive. I have 3 sets of staircases and balconies to finish carpentry on, and will be driving 100's of toenails on the balusters. Having them only partially drive in and have to hammer and nail punch each would have been a nightmare, not only time and aggrevation wise, but also to have to fill in and sand all those 100's of enlarged holes that the nail punch would make. I decided to try out the Bostitch. Man o' man... What can I say? No mars, easily toe-nails, and a perfect level of counter-sink of the brad, while running the gun at only abut 80% of its max pressure, is what you get with this. This Bostitch brad nailer gun is very good. It is worth the few extra dollars spent. You will be happy you did. The review may help you make a decision. Give it a thumbs up vote. Thanks, Jim.

👤This is a temporary replacement for my brad Makita nailer that costs four times as much. I will use the old technology whenever it comes back from the repair shop. This one has been working well. It's an oilless design and you can put a brad exactly where you want it, even though it doesn't have a dry-fire lockout. The mechanism for setting the depth seems a little lightweight, but it works if you hold the gun correctly and savesay savesay after time, the nails all get countersunk or set flush to the correct depth I haven't had a problem yet. brads can be placed in tight places in reliefs because of the narrow tip. The plastic tip protects the nose from marring. There's nothing to complain about when it comes to performance. The gun is lighter than my old one. The firing noise is the same as any other brad nailer, so I disagree with another reviewer who thought the noise was louder. The gun's performance is first rate because of its low price. If it had a dry-fire lock, I would give it five stars instead of the silly little window that shows the gun is empty after the brads run out.

👤Just buy it. I love using it. It's used with 32mm or 1 1/4" brads on 18mm plywood for cabinet making. It happened that my packet was this size. I received a packet of mixed brads. They are also great. If you get my drift, I couldn't understand why I was having problems with nails skewing out the side. I wondered if I had the right brad nailer. I noticed that I was holding the gun parallel to the bottom piece of wood, rather than the other way around. Brad nails have a V shaped tip and they skew left or right. If I had known it earlier, I would have been spared a lot of grief and time. Lots of fun. The gun is running at 120 psi. You are supposed to run it at the lightest possible pressure, which is around 90 psi. It claims to be oiless. The manufacturers suggestion is to put a couple of drops of air tool oil into the air intake. I wondered if sewing machine oil would do the same thing as airtool oil. It's a well made unit that is fun to use.

8. Bielmeier Cordless Electric Upholstery Carpentry

Bielmeier Cordless Electric Upholstery Carpentry

A brand new box. The product has all relevant accessories. The brad nailer has no cords, no limits, and is 20V MAX 2000mAh. They need power cords, gas, or compressor to use a corded tool. The brad nailer can be used in places without electricity. It is more convenient to use. The electric nail gun can fire 2000 nails. The latest impact drive technology ensures a stable shooting and better penetration strength. 18 gauge brad nails are available from 1-1/8" to 1-1/8", and a crown staple is available from 1-1/8" to 1-1/8". It has a quick-release loading magazine on the bottom of the gun that makes it easy to install staplers and nails. The design is ergonomics. The brad nailer and the front light are both less than 5 lbs, which gives you access into tight and dark spaces. Extra comfort is provided by the non-slip rubber handle. When the safety nose pin is fully depressed against the work surface, the safety nail gun can only shoot nails. The battery has charging and discharging protection, which makes it very safe and durable. The package contains a nail gun. There is a battery, a manual, and 800 Nails. They have a one-year warranty. If you have a question, please contact them. The package contains a nail gun. There is a battery, a manual, and 800 Nails. They have a one-year warranty. If you have a question, please contact them.

Brand: Bielmeier

👤The product is nice. Works are described. It feels heavy and solid.

👤The thing won't drive nails. You should save yourself from the trouble.

9. 18 Volt AirStrike 18 Gauge Cordless Tool Only

18 Volt AirStrike 18 Gauge Cordless Tool Only

It's ideal for wood working, upholstery Installation, flooring, molding, roofing, picture framing, door and window installation. It's perfect for building pet houses. It can drive up to 60 nails per minute. No compressor, hoses or expensive gas cartridges are required. Convenient and superior performance are offered by the corded design. Convenient and superior performance are offered by the corded design.

Brand: Ryobi

👤I've spent a lot of money on tools in the past. Those annoying jobs will be made easier by this thing. I'm going through the house looking for things to use. It seems silly to think that a bunch of people have complained about the weight. The brad gun is more likely to wiegh than a regular one, but the compressor that comes along with it and the hose that tangles wiegh so much more. The extension cord is no longer trip over. It takes about a second or two for the nail to be shot out, but after the third time, I was off and running. If you already own a battery-operated item, they will work with it. I bought 1.5 inch nails for a project that I am doing and they sat in the box without a problem. I had about 50 nails done last night and still have a full charge. The area is lit up by a great light. These people lie to get you to buy from them, so I won't give much information about the seller. They don't have the item in stock, so you will get it from them. I'm not the only one who has done it. I wanted to cancel my order but it would have taken longer. The ad said 2 day shipping. 13 days later, I got nailed.

👤I used a friend's AirStrike tool to drive 1500 nails. I didn't think I'd find much use for a nailer. I got my own because I can't live without one. If you want to use the battery for big jobs, then you should get a second battery.

👤The tool is heavy and bulky. I have a pneumatic brad driver that is 888-282-0465. The pneumatic tool has a compressor, hose, power, etc. The tool is not able to fit in tight spaces. There is a delay from when you squeeze thetrigger until the tool shoots the brad that takes a little getting used to.

👤The product is powerful enough for 2.5in nails. It was used to fiz boards on wood projects. It's more practical than the whole pneumatic system.

👤It is light and easy to use. The job is being done with quality construction.

👤Why bother with air compressor when you can use a nice tool?

👤I use this for small jobs all the time as a contractor. Delv is fast and well packed to minimize damage. The price is great for a high-quality product.

👤It's very handy. I used it to install a bed in my kitchen. It's easy to reload. I'm very happy I bought this.

👤Thank you, it is faulty, please replace it.

👤Denn DAS Teil ist das bitte. Ich war immer skeptisch, soll I mitten in dem groen Teich alles "nur" getackert/genagelt. Ich ist die gute Schraube. Aber ist Klasse. Sehr guter Preis, klasse in der Handhabeung, schneller Wechsel der Nagelstreifen, ZWEI. Verschiedene Einstellmglichkeiten der Eindringtiefe. Praktische und schnell ist Modi, Einzel, and Automatikschuss. Im Gewicht des Gertes ist immer, aber meine Gte. Maschine ist ne ist! Sehr schnelles Arbeiten ist so unfassbar. Schnelles, effizientes, and scupes are all part of the Arbeiten. Im Holz ist das "Halteelement". Wer macht, das ist in schillerndem BLING angrinsen. Deswegen nehme, wie bei anderen Projekten DIESE. Ich bin begeistert!

10. CRAFTSMAN CMCN616C1 Cordless Finish Nailer

CRAFTSMAN CMCN616C1 Cordless Finish Nailer

Convenient air flow is provided by the built-in air duster. This nailer drives 16 GA finish nails. The design of the nailer eliminates the need for a compressor, hoses or gas. Climate conditions provide consistent firing power. Continuation results: There are tool-free depth settings for quick set up. Improved EFFICIENCY. The settings for jam and stall are tool-free. There is an orderly balance. The lightweight has an optimal center of gravity and is light enough to carry. There is an added benefit. The handle is overmolded. CONVENIENCE: Belt hook for access and storage. CONVENIENCE: Belt hook for access and storage.

Brand: Craftsman

👤There was an update on 3/16-21. I use the nailer more than I thought. It's great for quick fixes and nails under 2 inches. I would give it 4.5 stars. The value is great. It is a very good value. My experience is that the nailer can do up to 2 inches of pine. I got air nailer out to speed things up. I'm neutral on whether I would purchase again. If you are considering this, you should get the air kits with a finishing or brad nailer.

👤I think I have at least one of the major power tools. I've had several trim/finish nailers that were powered by a gas cylinder. I've had all of them and still have a few. I have air powered as well, but Rechargeable is my favorite. These can be used for quick trim jobs after a window replacement. The tool is almost entirely synthetic, with very few metal parts. The drive mechanism and tip are made of metal. There is a spare boot on the nailer. The battery is not compatible with other tools. The tool can be hung from a belt with a hook that slides into it. The work area has dual lights. Pull the gun when the tool tip is down. The nail is driven about a quarter of a second later. The foot distance from the tip is adjusted by a dial. It doesn't change the power of the tool. It's probably 8 pounds. It takes 16 gauge straight nails. James doesn't need tools to be cleared. Pop a release by the nose and the tip opens. Some nailers use a tool, while others use the same method. Pop the release, a catch opens, and the face of the shaft opens. The driver won't fire unless the tip is depressed. Driving two inch nails into the board with the max depth setting countersinks the nail. The nail is almost flush when it is driven through the oak and into the particle board. That has 1.5 inch nails. There is an additional approx. if the boot is removed from the tip. I need to do this with my other nailers. I use masking tape to protect the wood. A well made tool and zero jams with over 200 nails. A bit of caution goes a long way when it comes to jams caused by driving the nail into another nail or screw. There is a tool, a depth adjustment dial, dual led's on the work surface, and a mechanism to clear jams in the nail slide area.

👤I wanted to be able to shoot nails into boards. The 16 GA model is easy to use. It's a bit more expensive than the 18 GA model, but you get what you pay for. It was easy to load the nails from the bottom and hold them. Smooth shooting is not noisy or heavy. Excellent job, Craftsman!

👤The first one I received was not up to par with the user manual. I received my second one and 10 nails and the same issue happened, the same code per the manual. "Defective". I don't recommend this, it's too new and needs improvement.

11. BHTOP Cordless Lithium Ion Rechargeable Carrying

BHTOP Cordless Lithium Ion Rechargeable Carrying

The battery and charger are not sold together. It's compatible with Nail& Staple and can be used for a range of materials and applications. brad nails are suitable for 25mm to 50mm (1" to 2”) 18 gauge. It is easy to deal with high-intensity work when you have a dual mode switch. The rotation of the regulation knob is the controlling factor. Safety designs to require that the nail gun can only work when the safety switch is pressed in order to avoid damage. It's perfect for any work scene because of its integrated efficient air compressor,wireless use,lightweight,malfunction Indicator LEDs,non-slip rubber handle and portable hook design. Load staple against the machine body and load nail against the nose with your right hand. The nailer may be jammed if the nails are longer than 2” or shorter than 1” When you get stuck, unload all nail and keep the magazine open. The machine will fix the problem. Make sure the screws on the nose are tight. It should have enough power. Load staple against the machine body and load nail against the nose with your right hand. The nailer may be jammed if the nails are longer than 2” or shorter than 1” When you get stuck, unload all nail and keep the magazine open. The machine will fix the problem. Make sure the screws on the nose are tight. It should have enough power.

Brand: Bhtop

👤It does the job, but it doesn't impress me at all. It is a bit expensive for how low the quality is. It does work, but half the time the nails don't go in all the way even with the depth setting all the way down. It doesn't jam a lot but it is good. It is very touchy when it comes to the nail depth. It is hard to take the battery off and on, that is my only complaint. You can get better prices for just twenty or thirty dollars more.

👤The brad nail is a fairly light-weight tool that has become one of my favorites. I don't have to be married to my compressor to be able to grab it on the fly.

👤Once you get the depth settings right, this works well. It is easy to load the Brad nails. Would recommend this.

👤30 days is not enough time to know if the product is a good one or not. If I continue to do business with Amazon, I will see a change in their ethics. The buyer has to pay for the product that is not good.

👤The compressor and loud noise are gone while doing base board and crown.

👤I love my nailer. Excellent tool. Shoots nails and punches directly into wood. A nice case was used to hold the battery and charger. A good score.

👤This is better than the dewalt 5 in 1 tacker. I use this every time I do woodworking. Awesome purchase.

👤I only know that it is a bit heavy for my 69 year old arms, but it is a versatile tool and well made.


What is the best product for electric nail gun 2 inch nails?

Electric nail gun 2 inch nails products from Ryobi. In this article about electric nail gun 2 inch nails you can see why people choose the product. Worksite and Worksite are also good brands to look for when you are finding electric nail gun 2 inch nails.

What are the best brands for electric nail gun 2 inch nails?

Ryobi, Worksite and Worksite are some of the best brands that chosen by people for electric nail gun 2 inch nails. Find the detail in this article. Ryobi, Dewalt and Metabo Hpt are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to