When you choose Genuine GE Appliances Parts and accessories, you can be confident that your appliance will be repaired quickly and correctly. Many replacement parts look the same but don't fit, please check your model number before purchasing. If you don't know if it's suitable, you can consult them via Amazon E-mail. This electric range burner replacement part is compatible with most General Electric ranges of GE and Hotpoint. The WB30M2 is a replacement for the WB30M2. The stove burner WB30M1 should be replaced. The WB30M1 and WB30M2 specifications include 6 watt 1350 watt, 4 watt and 8 watt, respectively. The replacement part is made from high quality material and easy to install. 3 Year Warranty and full-refund service are included. If you have a problem after receiving this item, please contact them, they will resolve it in 24 hours. 3 Year Warranty and full-refund service are included. If you have a problem after receiving this item, please contact them, they will resolve it in 24 hours.
👤If you get them, you'll need to adjust the prongs, and instead of fighting with the burner fitting into the pans, take the burner and slide it into the pan so that the front inserts into the locking grove. Before you do anything, make sure the burners are wiped down with a good degreaser because of the heavy oil on them.
👤My brother had been down to one burner for a long time, so I bought these and the pans for him. They were flexible enough to bend but not bend completely. They did burn off a bit. I rated them 5 stars because they look nice and my brother is happy after so long.
👤This is a General Electric stove and oven. Since moving in 12 years ago, this is the only replacement and as a renter, I won't go with me if I move. I will upgrade all of the appliances to black steel when I move out. The purchase is worth it for me.
👤It works perfectly on my stove. When you first start up the burners, they smell a little, but only for a short time, so turn on the fan above the stove. They are doing a great job. I have replaced my burners.
👤These were dropped in to replace some old burners that were slow to get hot. These were a perfect fit. Highly recommended.
👤I have never had to adjust an item with a pair of pliers. I bought a set of burners. I had to use pliers on 7 to get them out of the 8 prongs. The small burners are popping up. It's up when I look at it. I had to use a hammer to get it in the grove on one of the large burners. The burmer went down in the front grove but the left side had to be hammered down with a hammer. I don't know if I can get them back in. What a disaster.
👤Replacement burners have to be straightened out, but that is normal. Dawn power wash takes off grease in manufacturing. The burner we replaced cost us $35 and was not better or worse. I think it's a good purchase for our stove top. The seller is friendly.
👤These fit my stove perfectly. It was a mess before. It was so much cheaper on Amazon. They would have to be ordered from the local big box store. It would have taken a couple of weeks and would have cost a lot more.
One year return and exchange is supported by their products. You can request a replacement or a full refund if you're not satisfied. If you have any questions, please contact customer service. They will try to find a solution. The surface element replaces the electric range burner element unit set and is compatible with most brand ranges. WPY4381750,Y0E00801799, 400178,19950009,1938- 344, and15928 are replacements. The electric range burner element is made of steel. The composition of titanium has higher temperature resistance, stronger oxidation resistance, better wear resistance and lower deformation compared to the composition of 304, which is a type of steel. The range element is sealed with Teflon caps and shrinks at the two ends. The old seal process, which is sealed with Silicone caps and does not shrink, is not as safe as the new seal process, which is sealed with Silicone caps and does not shrink. The name is listed. The electric stove burner elements had been approved. They have experience in the production of electric heating element. They can make different types of products with better quality and safety. The dimensions shown in the picture 7 are not the actual ones for the range burner element. Please email them if you don't know if it's compatible. They will reply to you in the first time. The dimensions shown in the picture 7 are not the actual ones for the range burner element. Please email them if you don't know if it's compatible. They will reply to you in the first time.
👤Works well, but not like the old one.
There is a set of two large burners and two small burners. The number of turns is how many times the coil goes around. The "Y" style brackets are on it. The burner is only compatible with the GE Hot Point. The package includes 2 x small porcelain drip pan bowls, 2 x large porcelain drip pan bowls, and 2 x MP15YA 6. The MP21YA is 8 inches and has a 2200 watt 230 volts 5 turns. The pans are 7.5" in diameter. The drips from the cookware on the burner can be caught by the drip bowl. This part fits an appliance that is referred to as a stove, oven, cooktop, wall oven, or range oven. The brands that are compatible are: Whirlpool, Amana, May-tag, etc. Does not fit GE or Hotpoint models. The porcelain drip pans are of high quality. The MP22YA electric range burner element is made of non-metallic material with large resistivity, small temperature coefficients of resistance, low deformation, and not easy to embrittle. The manufacturer tested it. The standards are compatible with the original ones. One year return and exchange is supported by their products. You can request a replacement or a full refund if you're not satisfied. If you have any questions, please contact customer service. They will try to find a solution. One year return and exchange is supported by their products. You can request a replacement or a full refund if you're not satisfied. If you have any questions, please contact customer service. They will try to find a solution.
👤A year ago, I bought a condo with an electric range. It was too difficult to replace the range. I ordered a set of new coils from Amazon and they were not of good quality, but I finally bought these high-quality units after a year of dealing with this. Don't rust and they look very nice. Highly recommend on Amazon.
👤My stove works great after I found the right items and no problems at all.
👤This doesn't work on my stove.
👤I would have bought these sooner. Plugs right in and lines up. I will buy the exact same ones as these eventually go bad.
👤We love this product and it looks great on our black stove. I would suggest ordering these items together as a set.
👤The pans were perfect for the range top. They went in place. I was very happy with my purchase.
👤I was worried they wouldn't line up. They fit perfectly and worked as well as factory parts.
👤If you push them down lightly, they don't fit.
All major brands are compatible. The surface element coil supplies heat to the cooking area on top of the range. It is a heavy duty heating element. The burner element has a brackets. WB30T 10074 is a GE stove burner replacement. The WB30T 10074 range 8 inch surface burner element is compatible with the following. The brand is compatible. The 8 inch burner element has 5 turns. The number of turns is how many times the coil goes around. It has a rated power of over 2500 watt, over 2200 watt and over 2500 watt. If this part will fit your model appliance, please go by pictures,measurements and part numbers. Shut off electrical power and push the new coil element into place. The terminal block receptacle is under the cooktop and has the coil element pushed into it. Pull the coil element out of the receptacle and restore power to the range. Shut off electrical power and push the new coil element into place. The terminal block receptacle is under the cooktop and has the coil element pushed into it. Pull the coil element out of the receptacle and restore power to the range.
👤The mistake was ordering the 4 pack of 3 small and 1 large burner. I ordered the exact same brand and size as the one I had purchased. The mounting for the coil is too large for my stove and the burner works fine. The other ones of the exact same size and brand fit perfectly, so I found this strange. We used a metal saw to cut it to size because it would have been difficult to send it back and find a fitting.
👤This thing is cheap. The connection is soft and can't stay flat on the stove without a pan pressing it. It is cheap compared to the original parts. You are getting what you pay for. I used a heavy pan to press it down and it stayed in position. No one has complained so far. fully functioning.
👤It seems to work better than the original. It has a bigger coil but it works great so far.
👤It works great. I would recommend this product.
👤It was a great replacement burner for my stove.
👤It was not level. I put less water in the pot. I live on the edge.
👤It works well. It was a good price.
👤I like it more than the burner.
It is compatible with major brands. If you're not sure, send the seller your model number. There are many elements that are the same. The package includes a stove burner. The electric range burner element coil unit is set. The stove burner element has a 1500 watt 230v 4 turns burner. The turns are how many times the coil goes around. The "Y" style brackets are on it. Please confirm whether the size or style matches before order, please make sure your items size as picture 6-7, to ensure they fit your stove before puechasing. If the range burner doesn't sit flat on your stove, make sure the connection bolts are parallel and pushed a bit down. The center piece protective coating will burn off and smoke after being installed and turned on the stove. Don't worry about this. The heating element will work. The mp22ya electric range burner element unit is made of non-metallic material with large resistivity, small temperature coefficients of resistance, low deformation at high temperature and not easy to embrittle. The brands that are compatible are Roper, Whirlpool, Hardwick, Hoover, Kenmore, Magic chef, Kitchenaid, and Jenn Air. The brands that are compatible are Roper, Whirlpool, Hardwick, Hoover, Kenmore, Magic chef, Kitchenaid, and Jenn Air.
👤If you know how to modify the receptacle, it will be a good price.
👤The model number on my cook top is not legible. My unhappiness is related to Jen Air. It would fit my unit. It was a bad choice.
👤I was expecting a clean instruction, but they came with no instruction at all, and I think the issue would have been prevented if they had been told to warm or to wash. The center piece tends to go from glossy to mat black with a build up. It was very easy to swap. I command for the value.
👤The 8 were unbalanced after they were installed. The saucepan was on them. The ones that were 6 were ok. The center black plate was di-colored. They look bad. I won't buy them again.
👤It's easy to install and get just as hot as the originals. The first time you use the coating, it will smell and smoke.
👤It smells like burning metal. I have been running them on for the last few hours to remove it, but the house smells of it. Is this normal?
👤The new stove that I bought came with a temperature sensor that makes it impossible to cook properly, so I ordered replacements and everything works great.
When you choose Genuine GE Appliances Parts and accessories, you can be confident that your appliance will be repaired quickly and correctly. The Universal Electric Range Surface Element has a PCS Product Highlights. The stove top of electric ranges uses a surface element called Surface element 316442301 to produce heat for cooking. The stove burner replacement is strong and durable. The numbers are 1465861A,P4356467,PS2339242,MP26YA,EAP2339242,08002901, and 8012660. The color is black range coil surface element. The dimensions are 8.6''. Please go by pictures, measurements, and part numbers to determine if this part will fit your appliance. The model is Fits. The range coil surface element is part of the information. The element has pigtail, looped ends. The burner surface has a Y style brackets and a black emblem. The replacement 2 Prong, Plug-In Surface Element is for most brands of electric ranges. The range has a cooking area on top of it. Replacing damaged elements will keep your electric range running at peak efficiency. The range coil surface element is part of the information. The element has pigtail, looped ends. The burner surface has a Y style brackets and a black emblem. The replacement 2 Prong, Plug-In Surface Element is for most brands of electric ranges. The range has a cooking area on top of it. Replacing damaged elements will keep your electric range running at peak efficiency.
👤The product works like it should. The pans just slide around since it is not flattened like the original ones. Some of the reviews said it wasn't level. My pan slides when it is not level, it is kind of unsafe. Tonight it caused water to splash out. I wouldn't buy this product again. I would be more likely to buy it again if they changed it to a flatter version.
👤The burner coil is of good quality, but it didn't fit on my stove. It was tilted because it was raised too high. I would return it.
👤The original replacement for the 6 inch and 8 inch elements on the 11 year old stove was on the website. Delivery promptness and packaging was very good.
👤The old burner fell apart and we bought this burner to replace it. It went in without a hitch. Good value for money.
👤It would have been nice if it had gotten here when they said it would. I think it works for now.
👤The burners don't fit the pans. They hang over the edges of the pans.
👤It will not go up in my sockets far enough to be able to cook in the stove.
👤You won't get the angle of plug-in to stay down if you cut to fit the legs. On the plug-in side of the coiled steel, the tension is bowed slightly upwards. The pan is being made to tilt.
There is a guarantee after sale. If you are not satisfied with the product, please contact them in time, they will give you a satisfactory answer. The GE Appliances WB30M2 is a genuine original equipment manufacturer part. The heat is supplied to a cooking area by the Replacement GE Appliances Range. The WB30M2 Range has a surface element coil stove top heating element. The GE Appliances WB30M2 Range 8" Surface Element Coil is manufactured with premium materials forDurability and Fit, be sure to follow instructions in the owners manual when installing this part. When you choose Genuine GE Appliances Parts and accessories, you can be confident that your appliance will be repaired quickly and correctly. When you choose Genuine GE Appliances Parts and accessories, you can be confident that your appliance will be repaired quickly and correctly.
👤I received the first photo. The description said GE. I spent the extra money for GE parts so I didn't have a problem with them fitting properly as I have run into issues in the past with non genuine parts. The parts will not fit in a flat position. If you look at the photos, you will see that the genuine GE part is sitting flat, while the fake part is in the center. Be careful! The product is not a poor copy and is advertised as a Genuine GE product. Do not recommend. I will not purchase from this seller again. AMAZON needs to take action against this seller for false advertising.
👤The center piece of the coil had the "Genuine CalRod" logo on it. One very important difference. If you look at the photo I have attached, you'll see that it is missing aclip near the connection posts. The coil won't stay connected to the power sockets if the clip isn't large. If you put your pot on the burner, it will come out and you won't be able to use the power. I will have to return these and keep searching for the correct part if I want the large clip.
👤This is a picture of equipment. This doesn't mean that it is on the center plate. It seems to be decent, but not as pictured. I don't know what I bought. It came loose in a manila envelope without being packed, the prongs were bent on the ends. It seems to work after they were straightened, but I don't think that's the way I should receive something I bought for an exact replacement of the burner that was on my stove.
👤This was what I needed. I learned the hard way that you should get the model number from your stove before ordering. Although they looked like they would work, they didn't, so I took a chance on some other off brand burners. This will do the job if the model number is listed.
👤I needed to replace my burners because I couldn't find the 3 slot ones. The calrod shown in the picture is not genuine. The two were delivered cheap. The burners are not pictured as matching. No one wants their surface burners to be different.
👤The 8 inch coil burner that Parts plus of Miami advertised was a genuine product with the ge stamped on the tripod support. The aftermarket 8 inch coil burner they sent me did not have the ge stamped on the tripod support. One of the coils was broken due to manufacturing, so don't sell a aftermarket product. Other people said the same thing as I did. Bad business.
👤We recommend using genuine GE parts to repair your appliance. Our appliances are subjected to rigorous testing. The first one that was ordered was packaged by GE. The piece of junk I received is not new. Amazon did a switcheroo. The image and descripton are not accurate. Both were sold by Amazon. BS was not sold by Amazon. The vendor owes me money for 30 miles of depreciation and fuel. The fee for 50 minutes was $60.
What you get is 40V. A battery pack, a charging dock, a mowing wheel, and a user manual are included. The burner cover set is black. Tin burner covers are used for each set. When not in use, covers help increase counter space and make your range top look better. The kitchen should look clean and organized. It's easy to clean, hand wash and towel dry.
👤What can I say? I bought 3 sets in case a red color is hard to find. They are sturdy, easy to clean, and the color does not peel off. I drink green tea every day and my tea kettle is filled with water up to the fill line. The cover has not been damaged. These covers are recommended by me.
👤These are very flimsy. They don't hold up very well either. The finish was spotted and scratched. I put a teapot on one while it was steeping, not the kettle I used for boiling the water, but the clay teapot. The finish was ruined by it. I turned on the wrong burner and my apartment was filled with fumes. I need to replace them after only two months. I've decided to use heavier covers. fingers crossed
👤The burner covers I bought were for a small stove. They are a little over the listed dimensions, so they didn't fit my stove. I had to return them. The dimensions of the Calypso Basics are a tad under the listed ones, so they fit my stove perfectly. They were more expensive than these. They are a heavier metal construction. The dimensions listed are slightly off, so I took two stars off. These burner covers are a good price. If they were 8 and 10 inches, I would have kept them.
👤These would be lovely as decorative covers. I'm giving them three stars because of that. If you put any weight on top of them, you will find out how thin they are. The first time I used my oven, there was enough heat transfer from the feet that they stuck to the finish. I wouldn't put a hot pot on them. I've found new uses for my burner covers, such as organizational trays for spice jars, and to put under my blender, because its feet get stuck in the counter when I move it.
👤I love these, they make my stove look better. I tend to turn the wrong burner on and destroy burner covers in the past. I promised to remove all four before I ever turned on my stove. I spoiled one of the four in the set because that didn't last long. I re-ordered two sets because I am careless. The shade of red is beautiful. They are not heavy, but they are not expensive. It would be great if a company could make a burner cover that is heat resistant. I am very pleased with these. They tend to smudge a bit but clean up easily with a bit of window cleaner.
👤I can't figure out why one of the little ones has a blue line next to the star when the other one decided to return it.
👤This is the first issue I have ever had, I have used similar covers for 30 years. I always run them through the dishwasher as soon as I receive them, and once a month. These are not good. Water spots on small covers are hard to remove. They are even worse now that they were soaked. There is a They put on a coating that wasn't completely sealed.
It's easy to clean, hand wash and towel dry. This single- burner electric hot plate from CUSIMAX can fit into small spaces to provide easy and adaptable cooking, it's an ideal choice for student accommodation, office use, camping, parties, RVs, traveling or others. There is no stovetop required. The 1500W cast iron hot plate burner with 7 temperature control heating settings allows you to heat up food in seconds to the temperature you want. The hot plate is easy to clean and durable. The bottom of the stove is equipped with anti-skid feet to prevent it from moving during cooking. Automatic safety shut off function with temperature regulated. When cool, wipe with a clean cloth. The single hot plate burner works with all types of cookware in a 7.4” diameter. Product Liability Insurance of the United States covers all CUSIMAX products. If there are quality issues, you can get a free replacement. Within 24 hours, they will provide the best service and reply. It is normal that the machine will get hot when it works.
👤I have used my hotplate multiple times since I received it two weeks ago. It cooks nicely and evenly. I want to address some of the complaints in other reviews. There are going to be a few products that don't work. Get one that does if you return them. If you do the registration process, they have a good warrant in case of problems. It does heat up slowly, but that is the case with all electric burners, hotplates or stovetops. It takes a while to figure out what you want. It was hot to cook, lower temperatures are perfect for simmering. This stove has numbers, unlike most that say "high, medium, low." It's easy to figure that out. It stays hot even after you turn it off. It's a function of being heat-requiring cast iron instead of cheaper metal. When I make eggs or pancakes, I turn the burner off halfway through the first side and then flip them to let the retained heat finish side two. One thing to keep in mind is that the pan will be hot so set it on a heat-resistant surface until it's cooled down. That is in the instructions. If you pay attention, you will get better results. The cast iron unit is heavier than most hotplates because of it's strength. There is no gap around the burner for food or liquid to spill into and ruin everything. It doesn't take up a lot of counterspace, but it does take a full-size skillet. Rub off the control knob very quickly. I used black tape to solve the problem. The big orange light when you turn it on is a good clue. Hopefully you'll be as happy with yours as I am, and you should read and follow the instructions.
👤I sear steaks outside with this thing. It gets very hot. If you're using oil, make sure you learn the controls first, because it will rub the number labels on the dial pretty quickly. If you found the review helpful, please click the "helpful" button. It takes one second and will help others make decisions. Thanks!
👤It's easy to clean off the grease after it's hot. I think there were some reviews that said the dials were too hot. I was worried about that initially, but I don't think they get really hot within 30 minutes. The product's dial does not have much resistance, so it can be moved accidentally. I suggest that you always make sure to plug it in when it's not in use, even if it's on off.
👤My husband and I are staying in a family members guest bedroom while we wait for our new home to be built. They only had a small kitchen. We got a few other products to try to cook. They all fell short. There is a I can easily make myself some tea, he can cook a full pasta dinner, or something else we can think of, if I find this. It fits on the counter. It is small enough to fit in a cupboard. It was easy to clean, even when my husband tried to make it messy. So happy to be able to cook again after using this product.
A service called the Allied-Sales Service. The buyer's shopping experience is important to Fetechmate. If you're dissatisfied with the product, you can ask a question on their storefront or contact the seller through the "contact seller" option. They are here for you. The model is manufactured by the manufacturer. A genuine replacement part. The model is manufactured by the manufacturer. A genuine replacement part.
👤My Wife told me earlier this week that the elements on our model were not heating up and that the spacer under the elements had broken. This is 8 and 6 inches. I used to buy replacement coils at a local hardware store but I no longer like driving in the city so I researched and found both available through our Amazon Prime membership. I knew that I had to enter the model I was looking for in order to get the oven element that I had ordered from Amazon, so I went to the top of the screen and entered the model I was looking for, and the system advised me that it would fit my model. The element was easy to replace after we received it. The element is hotter than the faulty one so it will use less electricity. Make sure you know your stove's model number and use it to search in the Make Sure This Fits Your Model before you buy if you want to replace an element.
👤One of the front burners on my stove broke and split in two. I couldn't find the model number of the stove that I've never replaced. I could have brought the broken one to the store, but the prices were all in the $25 range. I took a chance on this one even though it's marketed as a replacement for a famous brand. The old one was closer to 7.5 inches. It works perfectly in my stove as a plug-in replacement. Line up and plug into the electrical connections. Amazon is once again going to the rescue.
👤You don't have to live with that in your life. My landlord replaced my range with the cheapest one on the market. This thing does not have an oven light. It has sensi temp burners. I have been using a hot plate, electric skillet and electric griddle for stove top needs for 2 years. I couldn't boil the water. They couldn't be replaced with non sensi temp burners. That's what the manufacturer wants you to think, and they almost had me! I almost bought my own stove because I was sick of it. Someone else took the challenge and found that you can replace them. I can't tell you how happy I am to see the red burners glowing again. 30 minutes for a low boil is all it takes to get soggy grilled cheese. I will be canning again this weekend. Simple joys in life! The only thing that matters is if the rings work. Happy cooking everyone!
👤The elements that came with my stove had a thermal control in the center of the burner. They would make it hard to cook. I bought this to replace one that went out in less than a year. It worked. I replaced them all and would recommend this product to anyone.
👤I always use O.E equipment. The only reason I had to replace this was because my receptacle terminal block went bad and burnt the terminal ends on my old burner. It is very well made, it fits nicely and securely.
Made in the USA using eco-friendly techniques. There are 2 MP21YA8", 2 MP15YA6", and 4 terminal block sets. With Hi. The range blocks are temp. It was not made from black plastic. These will not fit GE/Hotpoint. The burners have a "Y" style brackets. There are alternate part numbers that include 5304431014, 484783, SU 204, and the number S58Y21. Not made in China, but in North America. All parts sold by SupplyEdge come with a one year warranty. All parts sold by SupplyEdge come with a one year warranty.
👤The burners on my stove were replaced. It is 16 years old and one burner is shorting out. The piece under the stove top that held the power to the burner was dry rotted. These are ceramic...
👤It's like I got a brand new stove after installing these burners. I realize how inefficient my old burners were now that I have good ones.
👤I install the old ones back after having issues with the burner coils. 1. The new coils don't get red like the original ones, but they do get hot. The coil was weak. After taking off to clean a few times, the inside of the connector showed signs of wear. It was probably thin and bent. Don't recommend. It's fairly easy to install. I thought the size of the plates was standard for these type of stove. I was short by one. There are two large and two small. The old one still works. The older one does not get red hot as fast. The large one sits on an angle. It took some work to get it to a usable angle.
👤They are not sitting down. The tabs don't line up with the slots they are supposed to sit in. They are sloppy and loose. I tried to flatten it, but it broke. The little weld is useless now that it has broken. My pots and pans are upright. Can't fry more than one egg. They all go the same way. These things are not good.
👤The burners were easy to replace. Everything was needed. It came with shrink wrap.
👤I liked the simplicity of changing my burner. Pull the old one out and plug in the new one. The new burners work great and I have had them for about 2 months. I would have bought them sooner if they were less expensive.
👤These were easy to install and worked well for the old whirlpool oven. The wires are short so make sure you cut them off as close to the old one as possible.
👤The coils are easy to install and get hot fast. They arrived via FedEx three days before. If they work properly for 2 years, it's worth 45 dollars.
Electric range burner products from Longads. In this article about electric range burner you can see why people choose the product. Top-heater and Suphomie are also good brands to look for when you are finding electric range burner.
Longads, Top-heater and Suphomie are some of the best brands that chosen by people for electric range burner. Find the detail in this article. Appliancemates, Laffeya and Appliancemates are also brands that their products are worth to check.