The Florentine light and spout. The bike mirror is very strong. The bicycle mirror is made of strong materials and features a heavy weight. The Handlebar Bike mirror is a car safe glass lens. The aluminum black ED black Clamp is Eco-friendly. The new mallet! It's a fit for the Outside Diameter MTB and Cruiser Handlebar. Safe at Night, Reflector on the Back. The Allen Key is made in Taiwan. The Allen Key is made in Taiwan.
👤The mirror looks good on my bike and provides a useful view of the road and traffic behind me. I had to use the provided shim to install it below my mtb handlebars because my forearm would have blocked the view behind me. The installation took a bit of time, as the pieces were held together while the screw was inserted. I dropped the mirror on a concrete surface to show the strength of the glass. I was concerned about cracking the plastic, but didn't have any problems, because it took 888-349-8884 I might give this a 4.5 star rating, because it really checks a lot of boxes. It would need a larger mirror and longer arm to get five stars. It seems to be a good product at a good price.
👤The screw was small. There is a factory defect. Had to return it. Requested a new one. Hopefully the replacement is good. The box was not sealed. The first mirror was replaced with another one. I bought the same type left hand mirror and had no issues attaching it to my bike. I assumed this one would be the same quality since it's different. I wanted it to work like the left hand. There is a defect in the screw clamp mechanism that is not aligned with the mirror attachment. I returned it for a refund.
👤This bike mirror is great. Very well constructed, looks smart, and competitively priced. The design of the mirror makes it possible for it to be placed close to the handlebars. It can be installed above or below the handlebars. Even over the punishing trails that I like to explore, the easy to install clamp is still in place. It is not necessary on the trails, but it is a relief to be able to see cars approaching from behind. A must-have for safety.
👤The mirror allows you to see what is happening behind you. Its image is clear and sharp. If you can get it on the handlebars, your body won't block your view. When I moved the bell inward, I was able to move the mirror outward. You only need to do it once.
👤I have Hafny mirrors for my family's bikes and they are very good. There were no complaints there. I just got a flat bar road bike and bought a mirror for it. I would have used Hafny's bar end mirror, but my handlebars are not open round. I thought this one would be a good choice. I tried to mount it like a traditional above-the-bar mirror, but my arm and shoulder got in the way of the view. I'm not happy with the result of the mount under the bar. My position on the bike is so perfect that my eyes are behind the handlebars. The glass part of the mirror needs to be at a 45 degree angle. This reduces the size of the mirror picture. If you tip it away from you at 45deg, you'll understand. When I look down at the mirror, I get a view of what is behind me. I have to lift my wrist to get a better view because the only position I can get it in is most useful. The mirror under the bar is one of the last things to consider. On warm days, sweat drips on my forearm because it is still over the mirror. There is a It would help if the arm that holds the mirror to the handlbars was flexible.
The bag can be used as a bike rack bag and also as a commuter bag with a shoulder strap. Birthday, Thanksgiving, Christmas, or any other holiday is a great gift. The glass lens for the e-bike mirrors is Crystal. The body is Eco-Friendly and Impact resistant. Only fit a flat handlebar within 17-21mm. It doesn't work for drop bars. Quality Assurance,Patented, made in Taiwan. The silver and blue lens have anti-glare coefficients of 50% and 75%, respectively. The silver and blue lens have anti-glare coefficients of 50% and 75%, respectively.
👤The mirror's body is made of nylon. It feels like it will last. The drive of the screws is nice. The provided wrench fits perfectly in the drive. I would buy this again if this broke due to a spill.
👤I bought this mirror after using others and also returning a few, I really like the width and blue tint, it folds out of the way in a second. The rear view is the best I have ever seen.
👤Rear view mirrors are not always good. They often present an image that is too small, dark or jittery. The Meachow mirror is free of these problems. Its hexagonal shape makes it more visible. The mount is strong. The price is right and it's easy to install.
👤I'm very pleased with the mirror. So far, nothing negative. This is not brain surgery and it is very easy to install. It's stable and can fold in with the right amount of effort, if you tighten up the screws a bit. That is a nice shape. You can see a lot without distortion. I used to see mirrors that were distorted and fisheye-ish. These are not. It looks really cool. The finish is nice. My bike matches perfectly. It's a go.
👤I bought a mirror for my electric bike. It was easy to get on and it sat flush with the bar. That is like an auto mirror. Thinks look farther then they are in real life. Nothing new to get used to. I ordered a one for my bike. It's a Schwinn Coston. The bar ID was small for the mount. I got it to fit and tighten with a bit of time.
👤I put them up when not in use and down, they are easy to install and look great.
👤I don't know how difficult it was, but my husband didn't yell. Much has been fine. It is a dream to be able to see behind me while biking. We were biking on ice and snow with fat tire bikes, on the road for part of the way, and it was so much safer than twisting around. I highly recommend this purchase. You can see how they adjust.
👤I put it on my bike. I used a drill to cut away the rest of the leather after cutting the leather on the end of the handle bar. It has a system that allows the mirror stem to be inserted into the end of the handlebars and it expands using a supplied allen wrench. It was perfect!
👤The producto es ideal, it's ni muy pequeo. No se mueve aprietas. Un auto adaptado para tu bicicleta. I transporto calles de Ciudad. I am mucho a lavisin trasera.
The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use. The left application is ideal for the flat bar. The mirror lens is made ofstainless steel. The Outside Diameter FLAT Handlebar is 2126mm. There is a viewing angle. It was made in Taiwan. Eco friendly with nylon and fiber.
👤The mirror is well constructed. It's easy to install on my bike. The mirror was next to the handle grip so I had to slide the shift over. I tightened the screw on the mirror after I adjusted it. This is a bike. I like the size. The new position of the brake and the shift is easy to adjust to.
👤The company/supplier gave a nice thank you. It was easy to install. I put the mirror next to the handlebars with the short lever on my bike. Half of the image in the mirror is my arm because of that mounting position. I haven't tried to put it under the handlebars. The view picture behind is smaller than I would like. The image is not smooth as glass but it is a little distorted. The mirror bounces around a lot when it's on a curved plastic arm. I have had mirrors break when my bike fell over, so the steel reflector should be a good thing. It's better than nothing as a safety device. If you really want to see what's behind you, you have to look. The mirror will tell you if it's safe to do so.
👤I was trying to find a bike mirror that would work for our bikes. I had thought that the mirror would only show my arm. The Hafny mirrors could be mounted below the handlebars. I didn't like the under the handlebar mount at all, and found that they work very well above the handlebars. The photo is close but hard to get a camera shot of. My arm is in about 1/3 of the mirror looking back, which is fine for knowing what's coming up on you. In a few miles of riding, I shifted my arm just a couple of inches as I looked back, giving me a full view. The mirror seems to be stable. We have a couple of cobblestone streets which I usually avoid, but I have ridden a block or two and the mirror has not moved. I can't imagine a bike mirror performing any better than it does on our gravel trails. I am very pleased with the mirrors.
👤I use the mirror on my bicycle. The material quality and construction is good, and the shape provides a good field of view. The model is still in the middle of the flexibility range despite the curved arm. Not every adjustment point can be tightened to make it easier to bend. Mid-ride adjustments are required due to the mirror moving. There are mirrors out there that allow for tighter bend points. Scooter handle bars are further from the rider and don't suffer from this issue as much as the bike mirrors, because they don't stick out far enough to see around the body. The mirror is larger but still not able to see directly behind you and to the side at the same time, because of your body blocking half the view. The end bar mirrors don't have this problem. The quality of construction and design is good, but only 3 stars because you can't tighten the joints and I can't use the mirror due to random movement mid-ride.
The United States designed a patent for a bike accessory. The company is working on a more comfortable bike seat. They help people get rid of seat pain. The original designer of the bike seat has a patent. Please buy the authentic to ensure your comfort. They care about your shopping experience. 90 days free return and refund is what they offer. Please contact them if you have any questions. Handlebar Bike mirror is automotive grade safe glass. The aluminum black ED black Clamp is Eco-friendly. The new mallet! It's a fit for the Outside Diameter MTB and Cruiser Handlebar. The back is printed with a safe at night. The 5mm key is made in Taiwan.
👤I would like to thank the Australian who suggested that the right mirror be mounted upside down on the left handlebars. Don't worry. There are objects in the mirror.
👤I don't know how people ride bikes without mirrors, but being able to see cars behind me while riding gives me peace of mind. This one has a good field of view without being too large. I have only had to re-tighten the mirror once in the month since I got it, because my commute is on a bumpy gravel road. I've not run into any issues using the correct side mounted underneath if you buy the opposite side mirror.
👤The blue antiglare is too strong. I have both of them. It's hard to see anything in the mirror if you go into a shaded area. I never had a glare issue with the standard one. I thought this would be an upgrade. It wasn't.
👤The mirror is great. I used left-hand-side one when I was in the USA, and bought a rhs version to add, now that I am back in Australia. Elbows are always in the line of sight. I mounted the lhs one on the rhs side of the bike to go underneath the hand grip. This gives a clear line-of- sight for upright riding position on an e-bike. If you want to upright position your e-bike, you should put the opposite side of the handlebars on the underside. The mirror gives a better view of what's behind it. It is easy to adjust while out riding, and if you do it on something, it will be easier.
👤The bike mirror is very good. It was sleek and discreet. I mounted the bars with the grips. The view is perfect. The non-glare version is what I have. It looks good on the All City Macho Flat Bar. You need an Allen wrench.
👤Highly functional, lightweight, sleek, modern and low profile. It is easy to install an excellent mirror with only a U.S. Allen wrench. The manufacturer says the mount work only with 22.2mm handle bars. The hardware that is prackaged is also true. I bought a set of M6 - 1.00 x 30 screws at a cost of $2.14 at Lowe's and installed the mirrors on my mountain bike handle bar. The screws are the same size as the ones that come with the mirrors, but a bit longer. You can install the mirrors on your handlebars if they are a bit wider.
👤The bike has small tires and the streets are bumpy. There are a few pot holes in the area. I don't notice the bumps, but this mirror definitely did. I'm not saying it is just with this one, but in general, these types with multiple joints, etc. They have the same weakness, and any hard contact with the terrain will likely mis align the mirror from your original setting. I was afraid I would break the thing since it's not metal, but I had to pull over every block to reset the mirror angle. I'll keep my helmet mirror.
The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use. 50% of glare is eliminated by automotive grade chrome glass. The joint ball and mirror arm provide adjustments in multiple angles. You will find the perfect angle to make your ride safer. The 180 swirl at the ball joint allows you to park without hitting objects. Left side. Only and wide range lacing is used for the inside diameter of the handlebar. It doesn't work for Trek grips. There is a reason for this. The products were made in Taiwan and have been tested to make sure they are safe to use. The products were made in Taiwan and have been tested to make sure they are safe to use.
👤Does not fit in a 20mm opening. Even with the expander removed, the inside piece is 19mm in diameter. It states that it fits handlebar openings from 14mm to 23mm. Not true.
👤The mirror is large so you can see behind it. The mirror is easy to clean. What type of company gives you an allen wrench that only tightens two of the three screws? The third needed a different size wrench.
👤We bought 2 of these to put on our e bikes. They were easy to install and cover different handlebars. The basic install has proven to be very stable. Their shape makes them easy to see.
👤The mirror wouldn't fit a 19mm handlebar according to another reviewer. I thought the same thing when I couldn't fit it in my Frame Bike handlebar. I pulled the outer sleeve off accidentally. It has been removed from the photo and placed in the left hand corner. The mirror will fit the small openings once it is removed. The mirror is great, but the instructions are not up to par.
👤My old one broke when I fell off. The mirror is larger and has better lines of sight to the road behind me. It was easy to install. You will need a second wrench. The size of the screw is different. That is not a big deal. Otherwise, a great mirror! I do 30 miles of rides in urban/suburban traffic.
👤The handbrake assembly is made of quality materials. You can keep an eye on what's behind you by looking at the mirror. The only issue I had was with the strap. If it is too tight, it may affect the performance of the derailleur. It's a great mirror for keeping an eye on vehicles.
👤It's very easy to install a mirror for our bikes, which have different diameter handle bar tubes. The folding ability makes it easy to load the bike rack. It's easy to adjust, but it takes a few tries to get the tension adjustment just right to balance the adjustability with the stability. A great value. It is recommended.
👤I had not ridden a bike in a long time, and after getting one recently, I was not comfortable on the main road in my community. The rear view mirror was the perfect answer. It was easy to install and adjust my car. With a glance down, I can see what's coming from behind.
5mm Allen Key is needed forAssembling. The E-BIKE MIRRORS are specifically designed for 28mph E- bikes. The open aluminum handlebars are not for drop bars. There is an ideal way to perfect the OPTICAL PERFECTION. HD automotive grade glass is shatter-proof to keep you safe on the ride. Wind resistance is a topic. The weight and wind resistance can be decreased with a hallow design. Made in Taiwan, Pass the chemical standard, no harm plastic and metals. Made in Taiwan, Pass the chemical standard, no harm plastic and metals.
👤The mirror is good for my bike. It is built well and has great adjustability. I wanted a lighter all metal housing. I needed the mirror to come up higher so this worked out perfectly. Can be used for storage or going through tight spots. It was easy to modify my grips.
👤The Hafny e-bike mirror is beautiful. The power assist mechanism on my e-bike was next to the left grip, so the mirror had to be added to the handlebars. I was worried that the rigid arm wouldn't be long enough to give a good view of my body, but that is not a problem. I was able to see what was behind me because of the ball joint. The mirror is large and clear, and I feel safer when riding in traffic. You need two different sizes of levers to adjust the mirror.
👤The mirror has a large field of view. It pivots in any direction you want it to. The Rearview has a great view. Highly recommended.
👤I hate the stem length. This mirror is short if you ride a trike. I had to add an extension to the handlebars. I like to know that no one is going to try to get in my way when I ride a 30 speed. I only gave it 3 stars because of the length of the stem. They would have gotten 5 stars if they had two inches. Our handlebars are similar to a sportscar dashboard.
👤The mirror worked on the handlebars of the e-bike. Just like a car mirror. It's easy to install and adjust so you can see behind your bike. Aerodynamically designed so there is no shudder.
👤I love the mirror. Installation is easy and the viewing area is large. I tried cheaper mirrors for my bike but they broke after a few rides. I had to change the mirror on bumpy roads and trails because they never stayed in position. The mirror has screws that hold it in place so it won't move unless you want it to. The view is clear and the quality is great. This mirror is very good.
👤The mirror is awesome. It was rock solid. A large reflective surface. It's easy to install. It's very easy to place a handlebar in a variety of sizes. It is recommended.
👤It's enough to give a clear view past my shoulders. There are multiple points to position the mirror. The wide view is provided by the mirror surface. I was able to provide the proper tension to be able to move the mirror up and down when not in use.
👤It's easy to install. It's strong enough for a mirror. It matches up nicely with my bike.
3-year warranty applies to U lock for US, CA, UK, EU Cyclists, 90-day money back policy, and online customer service. If you don't like it, you will get a full refund. Rest assured. The UNBREAKABLE STEEL LENS are perfect for bikes. The wide range hitting is. Open ended grips or chisels are used for the inside diameter of the handlebar. It doesn't work for Trek grips. There is a reason for this. The Universal Design can be installed on both the left and right side of the handlebars. All types of bikes need a 5mm key for installation. The products were made in Taiwan and have been tested to make sure they are safe to use.
👤This is the first review. I like it. I was hesitant to cut a hole in my grip, but it turned out to be no big deal. I pushed it through after cutting it small. The plastic coller could break off if you are careful. When you tighten it, the coller expands to fit the bar. Don't over tighten, it's a no brainer. It's made of plastic and could break. I put mine there. I could turn it in when I wanted. The mount was positioned so the mirror was closer to me. It is a great mirror. You won't be sorry with this one if you consider its limitations.
👤The bike mirror is not perfect. A combination of bar-end mirror and a helmet/glasses mounted mirror is the ideal setup, according to my opinion. I can see my quads as I pedal. It looks like I have some quads if the light is right. I can see my quads as I pedal. It reminds me that I'm not going to have those big legs. A quick glance downward gives a quick check of traffic. There is a CON: It's not as easy to pick out vehicles when you have a mirror closer to the road. A quick glance downward is all it takes. If you are looking down, you are not looking ahead. This will probably improve with time. I don't have to crane my neck to see the mirror when I ride in the drops. The main reason I bought this mirror was the neck issue. The mirror isn't useful when standing. The helmet mirror works. The image shakes due to the road surface vibrating. The same thing happens with helmet-mounted. The mirrors I got were not as bad as some other reviews said. The field of view is great. I tightened the adjusting screw after four rides so that the mirror wouldn't shift when I hit a road hazard. It was annoying. Amazon wrapped a piece of cardboard around the individual boxes of the mirrors. The mounting screws were lost when they got here. It took a week to get a replacement screw, but the seller was very responsive. I'm not used to having something at the end of the bar, and a minor hip injury at a traffic stop makes the mirror move.
👤I followed the advice of a well-respected fellow cyclist and ordered and installed a mirror. I can tell that my bike's coolness decreased. I took it out the next day for a 50-mile tour ride. I realized my safety has increased many times over. I can now see my lane and the one next to it without having to crane my head. I was able to see cars coming up and knowing when they were about to pass me with the help of my radar. If you don't look back, you won't know if the car is on the next lane or about to hit you. I think it will take a bit of time to get used to the mirror. I took one star off because I had to adjust the screw several times as it hit my leg when I got off the saddle. The view behind the mirror is very good, even though you can't see it on the rough roads. I am testing several more mirrors before I make a decision. I'm pretty sure this will be the one I keep, at least for one of my bikes. My friend said I looked cool, but I think I looked uncool. I will look cool, but I will be safer on the roads. Any small amount does count. I will never have a mirror again.
Bike Mirrors come with a protective film, please remove it before use. If you have a quality problem, please contact them. Tools are free to install. It's suitable for 22mm-32mm bike rear mirror. The lens can be attached to any fitted handlebars firmly and easily, thanks to the 2 anti-slip rubber gasket, which can hold the lens to the bike helmet mirrors holder for it to stay in place. The angle you want will be adjusted by the aluminum pole and the bike rear view mirror will be bent free to help you watch every direction of your back. It's perfect for cyclists who want to avoid neck strain because of the flexible pole, it's easy to get the perfect viewing angle no matter your preference. There is a safe way to ride a bicycle. Bike mirrors for handlebars 2 pack, no doubt cycling is fun and with a rear view mirror for bicycle you can see what's behind you or coming up real fast. As cyclists they need to watch out for distracted drivers and not paying attention. A bike made of snow is called a gondola. At any time, the lens can be adjusted to see what is coming from different directions. The mirror is fixed with double screws and two additional gasket can be placed to keep it tighter. The Florentine light and spout. The bike mirror is very strong. The bicycle mirror is made of strong materials and features a heavy weight. The Florentine light and spout. The bike mirror is very strong. The bicycle mirror is made of strong materials and features a heavy weight.
👤I was surprised how much I disliked these mirrors. I had a hard time finding a mount that gave me good visibility. The vertical stem of the handlebars seemed to be the best location for my bike. Vehicles approaching from the rear are hard to see because of the convex mirror. Maybe I'm missing something that would make these more effective. I wouldn't recommend them based on my experience.
👤I was able to see past my shoulder because I was able to mount the mirror right on the grip. I was able to do that on the mount without moving the controls. The field of view was made for electric bikes. This product is very good.
👤I bought a set for my bike. Mirrors are covered to protect them from scratches. I only put one on the left side, but it went on without a hitch. I will see how I like it and if I need the second one. I'm putting the second one on my other bike since they are flexible and can be adjusted for either side. It seems like a perfect size.
👤They have to be mounted wide so you don't look at your arms. The room for your hands is limited by the rubber handgrip. It is not optimal but not horrible. They're called o.k.
👤The mirrors work well for my scooter. They are the only ones that were tall enough to give me a picture of what was behind me. As you ride it makes a high-pitched noise that gets louder and louder as you pick up speed, because the mirror can be repositioned but doesn't lock into place. The designer should have designed the mirror so that it would lock into place. The attachment apparatus is an unfortunate part of the mirror. It does the job, but it loosens and I have to tighten it every few days. I get the safety advantage of seeing what is over my left shoulder without having to turn around, but I have to deal with an extremely annoying noise, so it is acceptable.
👤I bought these to replace a set of mirrors that wouldn't let me see cars coming from the rear without turning the bike. The mirrors on the high stalks solved all the problems. The instructions and assembly were not very good but the result was fantastic and I am safer on my bike because of it.
👤The design of the two mirrors is better than expected and they are holding up well after a week of use. It is easy to remove by hand and then the arm bends to the desired angle. The mirror can be adjusted to change the angles slightly. Will be buying more as gifts.
👤The price for a set of 2 is the same as for other single bike mirrors. There is nothing bad about the design or quality. The arm is long enough for me to peer from my side, and the mirror is tightly held in place. The value is great.
Made in Taiwan, Pass the chemical standard, no harm plastic and metals. 50% of glare is eliminated by automotive grade chrome glass. The joint ball and mirror arm provide adjustments in multiple angles. You will find the perfect angle to make your ride safer. The 180 swirl at the ball joint allows you to park without hitting objects. It's possible to fit both left and right and wide range fitting. It doesn't work for Trek grips. There is a reason for this. The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use. The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use.
👤The mirror keeps on working. I have fallen on my bike 4 times in the last 2 weeks. My mirror is on the left side of the room. I went to the ground, the grass, and the gravel with a metal fence next to it. This mirror is not broken from my falls. I need to be the face of this mirror. The mirror is more impressive than my riding ability. I'm still working on my confidence. It was easy to attach because of the abuse it has taken. I had better views of traffic behind me with it attached to the end of the handlebars. The mirror has many directions to be set in and you have to remain tight. I had to adjust the mirror every time I fell, but it never came loose. Again... amazing!
👤I settled on this Hafny item after looking at a lot of ebike mirrors. It is a great product. It is definitely worth it. The build is very strong. The mirror is made of genuine glass and has a large surface. The image is flawless because the surface is formed perfectly. It's easy to leave just enough force in the mount to make adjustments. The mirror is not moving on the bumpy roads. The first day I had it, I was chased by a dog. I was able to see him running behind me in the mirror. This mirror fits a wider range of handlebars with a use-it-if-you-need-it sleeve. A lot of the mirrors I looked at wouldn't work on my bike. Measure the inside diameter of your bike's handlebars before buying a mirror. There is a This is not made in China. Applause!
👤The mirror is clear. The mounting hardware is hard to use. There are two sizes of mounts for different handlebars. I couldn't get it to expand enough to fit. I tried the larger size. That was too big. Since there was no way the small was going to fit, I decided to "persuade" it to larger by using a hammer. That didn't work at all, and I'm not sure if the handlebars on my Cannandale are a weir size. I doubt it. I have to find an alternative because the piece is stuck in the open end of my handlebars.
👤I bought this mirror for my wife's bike. The plastic above the bolt snapped when the screw was tightened to make sure the mirror wouldn't move. I had to turn the bolt a few more times after the plastic broke to get the Joint to stop moving. I tried to move the joint so as not to over tighten the bolt, but there was no warning in the directions. The joint wouldn't stop turning until after the plastic had broken, and there was no Torque setting for the bolt. Be careful when you tighten the bolts if you decide to purchase this mirror. I don't know if I just got a bad part. I will update this post based on Hafney's response to my email.
It was made in Taiwan. Eco friendly with nylon and fiber. The mountain bike mirror has a plastic mirror that is unbreakable for large field of view and a stable image. The shockproof design and foldable design make it portable. The design of the full rotation is fully adjusted for the perfect viewing angle. It can help you see all directions of your back. The mirror surface is made of a material that is safe. It has a longer service life and is safer than the traditional glass mirror surface. It can be damaged in a riding accident. The left and right sides of the drop and flat handlebars can be fitted with a bicycle rearview mirror. It fits inside the handlebar. It's perfect for road bike, mountain bike, city bike, E-bike, etc. Bike Mirrors come with a protective film, please remove it before use. If you have a quality problem, please contact them. Bike Mirrors come with a protective film, please remove it before use. If you have a quality problem, please contact them.
👤I tried the mirrors that have long necks and attach to the handlebars, but they just got in the way and looked like a bunch of stuff. The side mount mirrors fold nicely when not being used. Get them as a pair and never look back.
👤Absolutely wonderful! The mirror's fault, because I had to slice-off the end of my handlebars. I thought I could slice an "X" into the end of my grip, but it was too much material. So what? I sliced the end of the grip flush with the end of the handlebars, and the mirror covered the hole, which looked like it was always there. The wide-angle aspect of these mirrors is so perfect that I can see directly behind me, with only one mirror on my left side. The other mirror I put on my wife's bike is the same as mine. This mirror is recommended by both of us.
👤The rear view mirrors are perfect for folding electric bikes. They fit into the handgrips. You just have to cut the edge off so you can put the fitting inside the handlebar. Don't be afraid to do it, it will work. It's a big benefit to have it on the paths and roads, and the fact that they have great sightlines makes them an easy purchase.
👤My first complaint is my fault. They stay out. They catch on the bushes and door ways. This is my fault because they do. The mirrors are the second fault. It's hard to know if a car is behind you because they are so far away. The quality of the plastic is poor. I didn't expect the Leica optics. I would like something better. The description says it all. My fault. I'm going to look for some that don't change the view.
👤These fit nicely and serve their purpose. And with the 2 pack. My wife and I both have a mirror for the left side handle bar. These can be left or right and look the same. I would recommend it. I want to let other buyers that these are cheap. You will need to buy more if you drop the bike on these. They might not take much of a hit. We put them on the bikes. Don't cut too much rubber from the inside of the grip. It makes for a better fit. I think.
👤It's easy to install, provides a clear view behind you, but be careful not to knock them. If hit hard, they would like to break. That is likely the case with any mirror like that. If they are hit or brushed against, they are loose enough to move out of the way. If a mirror can't be mounted elsewhere on your handlebars, I would recommend these.
👤The bike mirrors are what I wanted. I've tried other types of mid-bar mount mirrors and was disappointed with how flimsy the necks are. Not these! I find this style more convenient than helmet or eyeglass-mounted types that could easily get damaged or left behind. The end-handlebar mirrors are easy to install and are durable enough to provide safety and ample visibility.
All Pedego models have one size. There is a safe impermeable leash. The polished steel lens makes your ride safer and 100% recyclable. The DURABLE ALUMINUM CLAMP is for the outside diameter of the cruiser and mountain bike handlebars. The joint ball and mirror arm provide wide range adjustments. You will find the perfect angle to make your ride safer. It's a good idea to put a deterrent on the back of your vehicle. The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use. The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use.
👤We ordered a left and right mirror. The right side mirror had the wrong mount when they arrived. The company responded to my email within a day, after I contacted them at the email address listed on the package. The company immediately sent the correct part and we love them. It is refreshing to be able to connect with a company that supports their customers and stands behind their products. Well done, Hafny! We are very pleased with the mirrors. Oncoming vehicles can see the bike better with a high mirror on it. The mirror's surface is less likely to break than a traditional glass mirror. The mirrors are in place when riding. The image on our ebike does not shake or blur. Matching a pair looks great on a bike. There is only one consideration: mounting space. Our bike has a large brake lever mounted next to the hand grip. That moves the mirror mount a bit further inboard. The mirror mount is closer to the stem on the opposite side, because the hand grip and bell are mounted next to it. The rider's arms are partially in view of the mirror. It works well, but I would like to see another centimeters on the mounting arms. This would not be an issue on a traditional bike. Attached are pictures of the mount and reflectors.
👤The mirror glass is flawless and they are very light. My wife's bike was one of the two that I bought. They don't move once the screws are tightened. There is a little noise while riding. You can see when someone passes on the bike path. The left side mirror is where most of the passing takes place and we are happy with the results.
👤Very happy with this. It's the only mirror I've found that gives me a clear view of my butterfly handlebars. Trekking or euro bars are available. I used a right mirror on the left side since I mounted the mirror below the bar. A bit heavy at 130g, but appears to be strong. I've yet to find a mirror that won't break when the bike falls over if the mirror extends beyond the handlebars. If the bike falls, I positioned this one so the handlebars hit first. The image of the mirror is good, as good as plastic mirrors. In case of a crash, I wouldn't want a glass mirror on my bike. It's ideal that size is ideal. - It's easy to adjust if you tighten it up a bit.
👤The Hafny mirror is a Taiwanese product, which is a step above the low priced mirrors on Amazon. Installation was done in a few easy steps: install the handlebars, insert the mirror shaft, and tighten. It should fit handlebars from 21-26mm. The mirror height and angle can be adjusted with a ball joint and Allen screw, and the mirror can be placed above or below the handlebars. The round mirror has a worse coverage than the oval one. The mirror I purchased is for the left side mount, but there is another model available for right side use. It is important to install the mirror's mount as close to the grip as possible for good vision. The shaft is long enough for cruiser bars, so it will work on straight mountain bike handlebars. The mirror design seems to vibrate more on rough pavement than the mirrors that are in the bar ends. This type of mirror can help you avoid cutting a hole in the end of your grip.
Hafny electric bike xp 2.0 products from Hafny. In this article about hafny electric bike xp 2.0 you can see why people choose the product. Meachow and Mordely are also good brands to look for when you are finding hafny electric bike xp 2.0.
Hafny, Meachow and Mordely are some of the best brands that chosen by people for hafny electric bike xp 2.0. Find the detail in this article.